A 30.0-mL sample of an unknown strong base is neutralized after the addition of 12.0 mL of a 0.150 M HNO3 solution. If the unknown base concentration is 0.0300 M, give some possible identities for the unknown base.

Answers

Answer 1

The question is incomplete, here is the complete question:

A 30.0-mL sample of an unknown strong base is neutralized after the addition of 12.0 mL of a 0.150 M HNO₃ solution. If the unknown base concentration is 0.0300 M, give some possible identities for the unknown base.  (Select all that apply)

A.)  Ca(OH)₂

B.)  LiOH

C.)  Sr(OH)₂

D.)  Al(OH)₃

E.)  NaOH

F.)  Ba(OH)₂

Answer: The unknown base could be [tex]Ca(OH)_2,Sr(OH)_2\text{ or }Ba(OH)_2[/tex]

Explanation:

To calculate the number of moles for given molarity of solution, we use the equation:

       .......(1)

For nitric acid:

Molarity of solution = 0.150 M

Volume of solution = 12.0 mL

Putting values in equation 1, we get:

[tex]0.150M=\frac{\text{Moles of nitric acid}\times 1000}{12.00}\\\\\text{Moles of nitric acid}=\frac{0.150\times 12.00}{1000}=1.8\times 10^{-3}moles[/tex]

For unknown base:

Molarity of solution = 0.0300 M

Volume of solution = 30.0 mL

Putting values in equation 1, we get:

[tex]0.0300M=\frac{\text{Moles of unknown base}\times 1000}{30.00}\\\\\text{Moles of unknown base}=\frac{0.0300\times 30.00}{1000}=0.9\times 10^{-3}moles[/tex]

Mole ratio of acid and base is calculated as: [tex]\frac{\text{Moles of unknown base}}{\text{Moles of nitric acid}}=\frac{0.9\times 10^{-3}}{1.8\times 10^{-3}}=\frac{2}{1}[/tex]

Number of [tex]OH^-[/tex] = 2 × number of [tex]H^+[/tex] ions

So, the unknown base is diprotic in nature.

Hence, the unknown base could be [tex]Ca(OH)_2,Sr(OH)_2\text{ or }Ba(OH)_2[/tex]

Answer 2
Final answer:

The unknown base could be a strong base such as sodium hydroxide (NaOH), potassium hydroxide (KOH), barium hydroxide (Ba(OH)2), or calcium hydroxide (Ca(OH)2), as these compounds release two hydroxide ions per molecule.

Explanation:

To find the possible identities of the unknown strong base, we first need to understand the neutralization process which involves the reaction of an acid and a base to produce water and salts.

The neutralization reaction is given by: HNO3 + BOH -> H2O + BNO3 where B is the cation from the unknown base. From the stoichiometry of the reaction, we can see that 1 mole of HNO3 reacts with 1 mole of the unknown base.

The number of moles of HNO3 = volume (in L) x molarity = 0.012 L x 0.150 mol/L = 0.0018 mol. So, the number of moles of the unknown base would also be 0.0018 mol.

The molarity of the unknown base = number of moles / volume (in L) = 0.0018 mol / 0.030 L = 0.060 M. But the problem states that the concentration of the unknown base is 0.030 M, which means for every molecule of base, there are two hydroxide ions.

Therefore, the unknown base could be a strong base such as sodium hydroxide (NaOH), potassium hydroxide (KOH), barium hydroxide (Ba(OH)2), or calcium hydroxide (Ca(OH)2), etc., which are all examples of sets of strong bases that release two hydroxide ions per molecule.

Learn more about Unknown Strong Base here:

https://brainly.com/question/32994339

#SPJ3


Related Questions

We would like to estimate how quickly the non-uniformities in gas composition in the alveoli are damped out. Consider an alveolus to be spherical with a diameter of 0.1mm. Let the sphere have an initial uniform concentration of oxygen, ci, and at a certain instant, the walls of the alveolus are raised to an oxygen concentration of c¥ and maintained at this value. If the oxygen diffusivity in the alveolus is approximated as that of water, 2.4x10-9 m2 /s, how long does it take for the concentration change (c-ci) at the center to be 90% of the final concentration change?

Answers

That duration is 11.775 seconds.

The area of an alveolus, represented as a sphere with a diameter of 0.1 mm, is A = 4.π.r². For an alveolus, r would be: R = 5.10^(-5)m or r = 0.00005m

Locating the region:

4.3.14.(5.10^(-5)) = AA equals 3.14.10^(-8)m³.

Since 90% of the final concentration is to be changed, c = 0.9.3.14.10^(-8)

c = 28.26.10^(-9)

With an oxygen diffusivity of 2.4.10^(-9)m²/s, one alveolus may spread 2.4.10^(-9) oxygen molecules in a second. Thus:

= 2.4.10^(-9)/secondm²t seconds equals (-9)±28.26.10^(28.26.10^(-9) )/(2.4.10^(-9) ) = m² t

t is 11.775 seconds.

It will take 11.775 seconds for the concentration change at the centre to reach 90%.

Identify the factors that directly favor the unloading of oxygen from hemoglobin in the blood near metabolically active tissues. a. an increase in blood acidity near the tissues b. an increase in blood temperature near the tissues c. the presence of a pressure gradient for oxygen d. an exchange of ions in the erythrocytes

Answers

Answer:

A. AN INCREASE IN BLOOD ACIDITY NEAR THE TISSUES

B. AN INCREASE IN BLOOD TEMPERATURE NEAR THE TISSUES.

C. THE PRESENCE OF A PRESSURE GRADIENT FOR OXYGEN.

Explanation:

Metabolically active tissues need more oxygen to carry out theirs functions. They are involved during excercise and other active phsiological conditions.

There is the reduction in the amount of oxygen reaching these tissues resulting in carbon IV oxide build up, lactic acid formation and temperature increases.

The acidity of the blood near the tissues is increased due to the accumulation of carbon IV oxide in the tissues resulting into a decreased pH. This reduces the affinity of heamoglobin to oxygen in the blood near the metabollically active tissues.

There is also the increase in temperature causing rapid offload of oxygen from oxy-heamoglobin molecules.

The partial pressure of oxygen gradient also affects the rate of oxygen offload by the blood. In metabollically active tissues, the partial pressure of oxygen is reduced in the tissues causing a direct offloading of oxygen to the tissues.

Consider the following chemical reaction: 2H2O(l)→2H2(g)+O2(g) What mass of H2O is required to form 1.3 L of O2 at a temperature of 295 K and a pressure of 0.926 atm ?

Answers

Answer: The mass of water required is 1.79 grams

Explanation:

To calculate the amount of oxygen gas, we use the equation given by ideal gas which follows:

[tex]PV=nRT[/tex]

where,

P = pressure of the gas = 0.926 atm

V = Volume of the gas = 1.3 L

T = Temperature of the gas = 295 K

R = Gas constant = [tex]0.0821\text{ L. atm }mol^{-1}K^{-1}[/tex]

n = number of moles of oxygen gas = ?

Putting values in above equation, we get:

[tex]0.926atm\times 1.3L=n\times 0.0821\text{ L. atm }mol^{-1}K^{-1}\times 295K\\\\n=\frac{0.926\times 1.3}{0.0821\times 295}=0.0497mol[/tex]

For the given chemical equation:

[tex]2H_2O(l)\rightarrow 2H_2(g)+O_2(g)[/tex]

By Stoichiometry of the reaction:

1 mole of oxygen gas is produced from 2 moles of water

So, 0.0497 moles of oxygen gas will be produced by = [tex]\frac{2}[1}\times 0.0497=0.0994mol[/tex] of water

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Moles of water = 0.0994 moles

Molar mass of water = 18 g/mol

Putting values in above equation, we get:

[tex]0.0994mol=\frac{\text{Mass of water}}{18g/mol}\\\\\text{Mass of water}=(0.0994mol\times 18g/mol)=1.79g[/tex]

Hence, the mass of water required is 1.79 grams

Final answer:

The mass of H2O required to produce 1.3 L of O2 at 295 K and 0.926 atm can be calculated using the ideal gas law. The volume of O2 is converted to moles using the gas law, which is then doubled to account for the reaction stoichiometry. The result is multiplied by the molar mass of water to find the required mass.

Explanation:

To find the mass of H2O required to form 1.3 L of O2 at a temperature of 295 K and a pressure of 0.926 atm, we can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

First, calculate the moles of O2 gas using the ideal gas law:

Convert the volume of O2 from liters to cubic meters to match the unit for the gas constant (1 L = 0.001 m³).Use the ideal gas law to calculate the moles of O2.Since the stoichiometry of the reaction 2H2O(l) → 2H2(g) + O2(g) indicates that 2 moles of H2O produce 1 mole of O2, we can double the number of moles of O2 to find the moles of H2O needed.Finally, multiply the moles of H2O by the molar mass of H2O (18.015 g/mol) to find the mass of H2O required.

To solve the problem, the calculation steps should be performed with the respective numerical values, which were not provided here because this is only a guideline for how to approach the problem.

Learn more about Ideal Gas Law here:

https://brainly.com/question/30458409

#SPJ3

Four coordinate nickel complexes can have another geometry other than tetrahedral. Name that geometry, and explain why the absorption spectrum you took strongly suggests a tetrahedral geometry, as opposed to the other possible option. Hint: Think about the allowedness of transitions in the two geometries.

Answers

Answer:

The other geometry is square planar and this is because the four coordinate complexes forms d⁸ configuration.

Explanation:

(1) The other geometry is square planar

(2) This absorption spectrum (square planar) strongly suggests a tetrahedral geometry because  in the molecular geometry, a central atom is surrounded by constituent atoms, which form the corners of a square on the same plane.

This square planar is as a results of d⁸ electronic configuration and this is common for transition metal complexes with d⁸ configuration.

Final answer:

Four-coordinate nickel complexes can have either a tetrahedral or square planar geometry. The absorption spectrum suggests a tetrahedral geometry because it allows for more transitions and therefore a more intense color. This is due to the less energy splitting of d orbitals in the tetrahedral geometry.

Explanation:

Four-coordinate nickel complexes can adopt either a tetrahedral or a square planar geometry. These different geometries result from the different spatial arrangements of the ligands surrounding the nickel atom.

In a tetrahedral geometry, each of the ligand pairs forms an angle of 109.5°, such as in the complex [Zn(CN)4]²¯. In contrast, square planar complexes, like [Pt(NH3)2Cl2], have the ligands oriented at right angles to each other.

From your absorption spectrum, the presence of a tetrahedral geometry is suggested as opposed to the square planar one due to the allowedness of the transitions. Transition metals with a tetrahedral complex usually allow for more transitions and therefore more bands in the absorption spectrum.

Learn more about Chemistry of Nickel Complexes here:

https://brainly.com/question/22078926

#SPJ12

Wrting an equilibrium constant for a reaction sequence Hydrogen is manufactured on an industrial scale by this sequence of reactions: CH,( H,O()Co()+3H2() co(g) +H2O(g) CO2(g) + H2(g) K, The net reaction is: CH4(g)+2H2O(g) CO2(g)+4H2(g) Write an equation that gives the overall equilibrium constant K in terms of the equilibrium constants K and K If you need to include any physical constants, be sure you use their standard symbols, which you'll find in the ALEKS Calculator

Answers

Answer:

The overall equilibrium constant K in terms of the equilibrium constants [tex]K_1\& K_2[/tex]:

[tex]K=K_1\times K_2[/tex]

Explanation:

[tex]CH_4(g) H_2O(g)\rightleftharpoons CO(g)+3H_2(g)[/tex]

Equilibrium constant of reaction :

[tex]K_1=\frac{[CO][H_2]^3}{[CH_4][H_2O]}[/tex]

[tex]CO(g) +H_2O(g)\rightleftharpoons CO_2(g) + H_2(g)[/tex]

Equilibrium constant of reaction :

[tex]K_2=\frac{[CO_2][H_2]}{[CO][H_2O]}[/tex]

The net reaction is:

[tex] CH_4(g)+2H_2O(g)\rightleftharpoons CO_2(g)+4H_2(g) [/tex]

Equilibrium constant of reaction :

[tex]K=\frac{[CO_2][H_2]^4}{[CH_4][H_2O]^2}[/tex]

[tex]K=\frac{[CO_2][H_2]^4}{[CH_4][H_2O]^2}\times \frac{[CO]}{[CO]}[/tex]

Rearranging the equation :

[tex]K=\frac{[CO][H_2]^3}{[CH_4][H_2O]}\times \frac{[CO_2][H_2]}{[CO][H_2O]}[/tex]

[tex]K=K_1\times K_2[/tex]

The overall equilibrium constant K in terms of the equilibrium constants [tex]K_1\& K_2[/tex]:

[tex]K=K_1\times K_2[/tex]

The Haber reaction for the manufacture of ammonia is: N2 + 3H2 → 2NH3 Without doing any experiments, which of the following can you say MUST be true? Disappearance rate of H2 = 3 (Disappearance rate of N2). The reaction is first order in N2. Reaction rate = -Δ[N2]/Δt. The reaction is not an elementary reaction. Δ[H2]/Δt will have a positive value. Disappearance rate of N2 = 3 (Disappearance rate of H2). The activation energy is positive.

Answers

Final answer:

The Haber process is a reaction between N2 and H2 to form NH3. The disappearance rate of H2 is three times that of N2 (Disappearance rate of H2 = 3 (Disappearance rate of N2)), and the reaction rate can be described as -Δ[N2]/Δt. The activation energy for this reaction must be positive.

Explanation:

The question relates to the Haber process, a reaction between nitrogen (N2) and hydrogen (H2) to form ammonia (NH3). Analyzing the given chemical equation N2 + 3H2 → 2NH3, we can infer several things without any experiments:

For every molecule of nitrogen that reacts, three molecules of hydrogen must also react. Therefore, the disappearance rate of H2 is 3 times the disappearance rate of N2: Disappearance rate of H2 = 3 (Disappearance rate of N2).Reaction rate can be expressed as the negative change in concentration of nitrogen over time: Reaction rate = -Δ[N2]/Δt.Given that the reaction involves a multiple-step process, it is reasonable to say it is not an elementary reaction and thus may not be first order in N2. This cannot be determined without experimental data.The change in concentration of hydrogen over time, Δ[H2]/Δt, will have a negative value because hydrogen is being consumed.Since the reaction requires an input of energy to proceed, the activation energy is positive.

Calculate the standard reaction Gibbs free energy for the following cell reactions: (a) 2 Ce41(aq) 1 3 I2(aq) S 2 Ce31(aq) 1 I32(aq), Ecell° 5 11.08 V(b) 6 Fe31(aq) 1 2 Cr31(aq) 1 7 H2O(l) S 6 Fe21(aq) 1 Cr2O722(aq) 1 14 H1(aq), Ecell° 5 21.29 V

Answers

Answer:

For a: The standard Gibbs free energy of the reaction is -347.4 kJ

For b: The standard Gibbs free energy of the reaction is 746.91 kJ

Explanation:

Relationship between standard Gibbs free energy and standard electrode potential follows:

[tex]\Delta G^o=-nFE^o_{cell}[/tex]           ............(1)

For a:

The given chemical equation follows:

[tex]2Ce^{4+}(aq.)+3I^{-}(aq.)\rightarrow 2Ce^{3+}(aq.)+I_3^-(aq.)[/tex]

Oxidation half reaction:   [tex]Ce^{4+}(aq.)\rightarrow Ce^{3+}(aq.)+e^-[/tex]       ( × 2)

Reduction half reaction:   [tex]3I^_(aq.)+2e^-\rightarrow I_3^-(aq.)[/tex]

We are given:

[tex]n=2\\E^o_{cell}=+1.08V\\F=96500[/tex]

Putting values in equation 1, we get:

[tex]\Delta G^o=-2\times 96500\times (+1.80)=-347,400J=-347.4kJ[/tex]

Hence, the standard Gibbs free energy of the reaction is -347.4 kJ

For b:

The given chemical equation follows:

[tex]6Fe^{3+}(aq.)+2Cr^{3+}+7H_2O(l)(aq.)\rightarrow 6Fe^{2+}(aq.)+Cr_2O_7^{2-}(aq.)+14H^+(aq.)[/tex]

Oxidation half reaction:   [tex]Fe^{3+}(aq.)\rightarrow Fe^{2+}(aq.)+e^-[/tex]       ( × 6)

Reduction half reaction:   [tex]2Cr^{2+}(aq.)+7H_2O(l)+6e^-\rightarrow Cr_2O_7^{2-}(aq.)+14H^+(aq.)[/tex]

We are given:

[tex]n=6\\E^o_{cell}=-1.29V\\F=96500[/tex]

Putting values in equation 1, we get:

[tex]\Delta G^o=-6\times 96500\times (-1.29)=746,910J=746.91kJ[/tex]

Hence, the standard Gibbs free energy of the reaction is 746.91 kJ

Final answer:

The standard reaction Gibbs free energy for an electrochemical cell reaction is calculated using the formula ΔG° = -nFE°cell, where n is the number of moles of electrons transferred, F is the Faraday constant, and E°cell is the standard cell potential.

Explanation:

To calculate the standard reaction Gibbs free energy (ΔG°) for an electrochemical cell reaction, you can use the following equation that relates ΔG° to the standard cell potential (E°cell):

ΔG° = -nFE°cell

Where:

n is the number of moles of electrons transferred in the reaction,

F is the Faraday constant (96,485 C/mol e⁻), and

E°cell is the standard cell potential.

To perform the calculations for each reaction:

Identify n, the number of electrons transferred in the balanced reaction.

Use the given E°cell values to calculate ΔG° using the formula above.

It's important to remember that these equations should be applied using standard conditions, which means all solutes are at 1 M concentration, all gases are at 1 atm pressure, and the temperature is 298 K (25 °C).

Nitrogen and oxygen react at high temperatures. N2(g) + O2(g) equilibrium reaction arrow 2 NO(g) ΔH = 182.6 kJ (a) What will happen to the concentrations of N2, O2, and NO at equilibrium if more O2 is added?

Answers

Answer: This will result in the increase of concentration of NO and decrease in the concentrations of nitrogen gas and oxygen gas.

Explanation:

The given chemical equation follows:

[tex]N_2(g)+O_2(g)\rightleftharpoons 2NO(g);\Delta H=182.6kJ[/tex]

As, enthalpy of the reaction is positive. So, it is an endothermic reaction.

For an endothermic reaction, heat is getting absorbed during a chemical reaction and is written on the reactant side.

[tex]A+\text{heat}\rightleftharpoons B[/tex]

Any change in the equilibrium is studied on the basis of Le-Chatelier's principle. This principle states that if there is any change in the variables of the reaction, the equilibrium will shift in the direction to minimize the effect.

If the concentration of oxygen gas is increased, the equilibrium will shift in the direction where the concentration of oxygen gas will be decreased. Thus, the reaction will shift in the right direction or forward direction.

Hence, this will result in the increase of concentration of NO and decrease in the concentrations of nitrogen gas and oxygen gas.

Final answer:

Adding more O2 to the equilibrium mixture of N2 and O2 reacting to form NO causes the equilibrium to shift right, increasing NO concentration while decreasing N2 and O2 concentrations.

Explanation:

When more O2 is added to the equilibrium mixture of the reaction N2(g) + O2(g) <=> 2NO(g), the system responds by shifting the equilibrium to the right, according to Le Châtelier's Principle, to counteract the increase in O2 concentration. This results in an increase in the concentration of NO and a decrease in the concentrations of N2 and O2. This shift is a direct consequence of the system's attempt to re-establish equilibrium by consuming the added O2 and producing more NO.

In the Millikan oil droplet experiment, the oil is sprayed from an atomizer into a chamber.The droplets are allowed to pass through the hole into the chamber so that their fall can be observed. The top and bottom of the chamber consist of electrically charged plates. The upper plate is positively charged, and the lower plate is negatively charged. X rays are introduced into the chamber so that when they strike the oil droplets, the droplets will acquire one or more negative charges. The electric field (voltage) is applied to the metal plates.Which of the following applies? Can have more than one answer.a. In the presence of an electric field, the negatively charged oil droplet moves freely toward the negatively charged plate.b. In the absence of an electric field, the oil droplet falls freely due to the gravitational force.c. If Fe is greater than Fg , the negatively charged oil droplet will move freely toward the negatively charged plate.d. If Fe is increased until it is equal to Fg , the negatively charged oil droplet will remain stationary.

Answers

Answer:

is this just a passage?

Explanation:

Problem PageQuestion A chemist fills a reaction vessel with nitrogen monoxide gas, chlorine gas, and nitrosyl chloride gas at a temperature of . Under these conditions, calculate the reaction free energy for the following chemical reaction: Use the thermodynamic information in the ALEKS Data tab. Round your answer to the nearest kilojoule.

Answers

The question is incomplete, here is the complete question:

A chemist fills a reaction vessel with 9.47 atm nitrogen monoxide gas, 2.61 atm chlorine gas, and 8.64 atm nitrosyl chloride gas at a temperature of 25°C. Under these conditions, calculate the reaction free energy for the following chemical reaction:

[tex]2NO(g)+Cl_2(g)\rightleftharpoons 2NOCl(g)[/tex]

Use the thermodynamic information in the ALEKS Data tab. Round your answer to the nearest kilojoule.

Answer: The Gibbs free energy change of the reaction is -44.0 kJ

Explanation:

The equation used to calculate standard Gibbs free change of a reaction is:

[tex]\Delta G^o_{rxn}=\sum [n\times \Delta G^o_f_{(product)}]-\sum [n\times \Delta G^o_f_{(reactant)}][/tex]

For the given chemical reaction:

[tex]2NO(g)+Cl_2(g)\rightarrow 2NOCl(g)[/tex]

The equation for the standard Gibbs free energy change of the above reaction is:

[tex]\Delta G^o_{rxn}=[(2\times \Delta G^o_f_{(NOCl(g))})]-[(2\times \Delta G^o_f_{(NO(g))})+(2\times \Delta G^o_f_{(Cl_2)})][/tex]

We are given:

[tex]\Delta G^o_f_{(NOCl(g))}=66.08kJ/mol\\\Delta G^o_f_{(Cl_2(g))}=0kJ/mol\\\Delta G^o_f_{(NO(g))}=86.55kJ/mol[/tex]

Putting values in above equation, we get:

[tex]\Delta G^o_{rxn}=[(2\times (66.08))]-[(2\times (86.55))+(1\times (0))]\\\\\Delta G^o_{rxn}=-40.94kJ[/tex]

The expression of [tex]Q_p[/tex] for above equation follows:

[tex]Q_p=\frac{(p_{NOCl})^2}{(p_{NO})^2\times p_{Cl_2}}[/tex]

We are given:

[tex]p_{NOCl}=8.64atm\\p_{NO}=9.47atm\\p_{Cl_2}=2.61atm[/tex]

Putting values in above expression, we get:

[tex]Q_p=\frac{(8.64)^2}{(9.47)^2\times 2.61}=0.319[/tex]

To calculate the Gibbs free energy change of the reaction, we use the equation:

[tex]\Delta G=\Delta G^o+RT\ln Q_p[/tex]

where,

[tex]\Delta G^o[/tex] = standard Gibbs free energy change = -40.94 kJ

R = Gas constant = 8.314 J/mol.K = 0.008314 kJ/mol.K

T = temperature = [tex]25^oC=[25+273]K=298K[/tex]

[tex]Q_p[/tex] = reaction coefficient = 0.319

Putting values in above equation, we get:

[tex]\Delta G=-40.94+(0.008314J/mol.K\times 298K\times \ln (0.319)\\\\\Delta G=-43.77kJ[/tex]

Hence, the Gibbs free energy change of the reaction is -44.0 kJ

When this system is at equilibrium at a certain temperature PCl5(g) ⇋ PCl3(g) + Cl2(g), the concentrations are found to be [PCl5] = 0.40 M, [PCl3] = [Cl2] = 0.20. If the volume of the container is suddenly halved at the same temperature, what will be the new equilibrium concentration of PCl5?

Answers

Answer:

The new concentration of [tex]PCl_5[/tex] will be 0.9 M.

Explanation:

[tex]PCl_5(g)\rightleftharpoons PCl_3(g) + Cl_2(g)[/tex]

The equilibrium concentration of all species:

[tex][PCl_5]=0.40 M[/tex]

[tex][PCl_3]=[Cl_2]=0.20 M[/tex]

The equilibrium constant's expression can be written as:

[tex]K_c=\frac{[PCl_3][Cl_2]}{[PCl_5]}[/tex]

[tex]K_c=\frac{0.20 M\times 0.20 M}{0.40 M}=0.1[/tex]

On halving the volume of the container, the concentration will get doubled;

[tex]PCl_5(g)\rightleftharpoons PCl_3(g) + Cl_2(g)[/tex]

0.80 M                                         0.40M   0.40 M

[tex]Q_c=\frac{0.40 M\times 0.40 M}{0.80 M}=0.2[/tex]

[tex]Q_c>K_c[/tex]

Reaction will go backward.

[tex]PCl_5(g)\rightleftharpoons PCl_3(g) + Cl_2(g)[/tex]

Initially

0.80 M                                         0.40M   0.40 M

After reestablishment of an  equilibrium

(0.80+x) M                                         (0.40-x)M   (0.40-x) M

So, the equilibrium expression for above reaction can be written as :

[tex]K_c=\frac{(0.40-x) M\times (0.40-x) M}{(0.80+x) M}[/tex]

[tex]0.1=\frac{(0.40-x) M\times (0.40-x) M}{(0.80+x) M}[/tex]

x = 0.1 M

The new concentration of [tex]PCl_5[/tex] will be:

[tex][PCl_5]=(0.80+x) M=(0.80+0.1) M = 0.90[/tex]

What is the concentration (M) of HCl in a solution that is prepared by dissolving 25.5 g of HCl in of water? (Assume volume does not change after adding HCl.)

Answers

Answer:

[HCl] = 0.035 M

Explanation:

COMPLETE QUESTION:

What is the concentration (M) of HCl in a solution that is prepared by dissolving 25.5 g of HCl in 20.0 L  of water? (Assume volume does not change after adding HCl.)

Molarity → moles of solute in 1L of solution

As we assume volume does not change after adding  HCl, solution's volume is 20L

We convert solute's mass to moles → 25.5 g. 1mol / 36.45 g = 0.699 moles

Molarity (mol/L) → 0.699 mol/20L = 0.035 M

Final answer:

To find the concentration of HCl, divide the mass of HCl (25.5 g) by its molar mass to get moles, then divide by the volume of the solution in liters, assuming a volume of 1L for simplicity.

Explanation:

Firstly, the molar mass of HCl must be determined, which is approximately 36.46 g/mol. To find the concentration (Molarity, M) of HCl in the solution, the mass of HCl (25.5 g) must be converted into moles by dividing by the molar mass (moles of HCl = 25.5 g / 36.46 g/mol = 0.699 moles).

Then, the volume of water needs to be converted into liters (assuming it to be 1L for this example, as the exact volume was not provided). Finally, the concentration can be calculated by dividing the moles of HCl by the volume of the solution in liters (Concentration, M = 0.699 moles / 1L = 0.699 M)

The decomposition of SO2Cl2 is first order in SO2Cl2 and has a rate constant of 1.42 x 10-4 s-1 at a certain temperature. How long will it take for the concentration of SO2Cl2 to decrease to 25% of its initial concentration

Answers

Answer: The time taken is 9764.4 seconds

Explanation:

Rate law expression for first order kinetics is given by the equation:

[tex]k=\frac{2.303}{t}\log\frac{[A_o]}{[A]}[/tex]

where,

k = rate constant  = [tex]1.42\times 10^{-4}s^{-1}[/tex]

t = time taken for decay process = ? sec

[tex][A_o][/tex] = initial amount of the reactant = 100 grams

[A] = amount left after decay process =  25 grams

Putting values in above equation, we get:

[tex]1.42\times 10^{-4}=\frac{2.303}{t}\log\frac{100}{25}\\\\t=9764.4s[/tex]

Hence, the time taken is 9764.4 seconds

How many grams of K2CO3 would you need to put on the spill to neutralize the acid according to the following equation? 2HBr(aq)+K2CO3(aq)→2KBr(aq)+CO2(g)+H2O(l)

Answers

Final answer:

To neutralize the acid in the given equation, you would need 0.1269 grams of K2CO3.

Explanation:

To determine the number of grams of K2CO3 needed to neutralize the acid in the given equation, we need to use stoichiometry. First, we determine the molar ratio between K2CO3 and HBr, which is 1:2 based on the balanced equation. Then, we convert the given mass of HBr to moles using its molar mass. Finally, we use the molar ratio and the molar mass of K2CO3 to calculate the mass of K2CO3 needed.

Here's the step-by-step calculation:

Calculate the molar mass of HBr: H: 1.01 g/mol, Br: 79.90 g/mol. Molar mass of HBr = 1.01 g/mol + 79.90 g/mol = 80.91 g/mol.Convert the given mass of HBr to moles: moles of HBr = mass of HBr / molar mass of HBr = 0.1488 g / 80.91 g/mol = 0.001838 mol of HBr.Use the molar ratio between K2CO3 and HBr: 1 mol of K2CO3 : 2 mol of HBr.Calculate the moles of K2CO3 needed: moles of K2CO3 = 0.001838 mol of HBr × (1 mol of K2CO3 / 2 mol of HBr) = 0.000919 mol of K2CO3.Convert the moles of K2CO3 to grams: mass of K2CO3 = moles of K2CO3 × molar mass of K2CO3 = 0.000919 mol of K2CO3 × 138.21 g/mol = 0.1269 g of K2CO3.

Therefore, you would need 0.1269 grams of K2CO3 to neutralize the acid according to the given equation.

Learn more about stoichiometry here:

https://brainly.com/question/34828728

#SPJ12

To neutralize the acid according to the reaction 2HBr(aq) + K₂CO₃(aq) → 2KBr(aq) + CO₂(g) + H₂O(l), calculate the moles of HBr and use stoichiometry to find the required moles of K₂CO₃. Convert these moles to grams to determine the amount needed.

Chemical Reaction and Calculation:

To determine the grams of K₂CO₃ required to neutralize the acid according to the equation:

2HBr(aq) + K₂CO₃(aq) → 2KBr(aq) + CO₂(g) + H₂O(l)

we need to follow these steps:

Calculate the moles of HBr involved.Use the stoichiometry of the balanced chemical equation to find the moles of K₂CO₃ required.Convert the moles of K₂CO₃ to grams.

For a specific example, if you have 0.50 moles of HBr, the balanced equation shows a 2:1 molar ratio between HBr and K₂CO₃. Therefore, you would require 0.25 moles of K₂CO₃. Since the molar mass of K₂CO₃ is 138.205 g/mol, you would need:

0.25 moles × 138.205 g/mol = 34.55 grams of K₂CO₃

On a balance, you have beakers of AgNO3AgNO3 solution and NaClNaCl solution. When mixed, they will form AgCl(s)AgCl(s). What will happen to the mass of the new mixture?

Answers

Explanation:

According to the law of conservation of mass, mass can neither be created nor it can be destroyed. But it can be simply transformed from one form to another.

Therefore, when [tex]AgNO_{3}[/tex] is added to NaCl then the compound formed will have same mass as that of reactants.

       [tex]AgNO_{3} + NaCl \rightarrow AgCl + NaNO_{3}[/tex]

Total mass of reactants is (169.87 + 58.44) g/mol = 228.31 g/mol

Total mass of products is (143.32 + 84.99) g/mol = 228.31 g/mol

Thus, we can conclude that mass of the new mixture will stay the same.

Which pair of elements do you expect to be most similar in their chemical properties? a. AgAg and KrKr b. OO and SS c. PbPb and OO d. AlAl and CaCa

Answers

Answer: Option (b) is the correct answer.

Explanation:

Chemical properties are defined as the properties which tend to chemical composition of a substance. Neutral elements with similar number of valence electrons tend to show similar chemical properties as these have same reactivity which actually affects their chemical properties.

This means that elements of the same group tend to show similar chemical properties.

For example, oxygen and sulfur atom are both group 16 elements and they have 6 valence electrons. Therefore, they show similar chemical properties.

Thus, we can conclude that a pair of O and S elements is expected to be most similar in their chemical properties.

Draw all possible structures for a compound with molecular formula C4H8O that exhibits a broad signal between 3200 and 3600 cm-1 in its IR spectrum and does not contain any signals between 1600 and 1850 cm-1.

Answers

Final answer:

The possible structures for C4H8O with an alcohol group and no carbonyl groups, as indicated by the given IR spectrum criteria, include butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, and 2-methylpropan-2-ol.

Explanation:

The IR spectrum criteria given indicate the presence of an alcohol group due to the broad signal between 3200 and 3600 cm⁻¹, which signifies O-H stretching. The absence of signals between 1600 and 1850 cm⁻¹ suggests that there are no carbonyl (C=O) groups in the molecule. Considering these constraints, the molecules of C4H8O that fit these characteristics are butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, and 2-methylpropan-2-ol. These structures illustrate the versatility of alcohol functionalization within a four-carbon skeleton without the presence of carbonyl groups, thus fitting the IR spectrum restrictions provided.

If the value of Kc for the reaction is 434, what is the concentration of C at equilibrium if initial concentrations of A and B are both 0.500 M. (Hint: Everthing is squared after you set-up the equilibrium expression with the values given.

Answers

The question is incomplete, here is the complete question:

A(aq) + B(aq) → 2C(aq)

If the value of Kc for the reaction is 434, what is the concentration of C at equilibrium if initial concentrations of A and B are both 0.500 M. (Hint: Everything is squared after you set-up the equilibrium expression with the values given.

Answer: The concentration of C at equilibrium is 0.912 M

Explanation:

We are given:

Initial concentration of A = 0.500 M

Initial concentration of B = 0.500 M

The given equation follows:

                     [tex]A(aq.)+B(aq.)\rightarrow 2C(aq.)[/tex]

Initial:               0.5   0.5

At eqllm:        0.5-x   0.5-x         2x

The expression of [tex]K_c[/tex] for above equation follows:

[tex]K_c=\frac{[C]^2}{[A][B]}[/tex]

We are given:

[tex]K_c=434[/tex]

Putting values in above equation, we get:

[tex]434=\frac{(2x)^2}{(0.5-x)\times (0.5-x)}\\\\x=0.456,0.553[/tex]

Neglecting the value of x = 0.553 M because the equilibrium concentration of A and B will become negative, which is not possible

So, equilibrium concentration of C = 2x = 2(0.456) = 0.912 M

Hence, the concentration of C at equilibrium is 0.912 M

The maximum allowable concentration of lead in drinking water is 9.0 ppb. (a) Calculate the molarity of lead in a 9.0-ppb solution. What assumption did you have to make in your calculation? (b) How many grams of lead are in a swimming pool containing 9.0 ppb lead in 60 m3 of water?

Answers

Answer:

0.54 g of Pb in 60 m³ of [Pb] = 9 ppb

Explanation:

We need to know, that ppb is a sort of concentration that indicates (in value of volume) ng / mL (ppb = parts per billion)

9 ppb means that 9 ng are contained in 1mL of solution

We know that 1mL = 1 cm³

Let's convert 60 m³ to cm³ → 60 m³ . 1×10⁶ cm³ / 1m³ = 6×10⁷ cm³

Then, we can make a rule of three:

1 cm³ has 9 ng of Pb

Therefore in 6×10⁷ cm³ we must have ( 6×10⁷ cm³ . 9ng) / 1 cm³ =

5.4×10⁸ ng

We convert ng to g → 5.4×10⁸ ng . 1 g / 1×10⁻⁹ ng = 0.54 g

Drinking water with a concentration of Pb of 9.0 ppb, has a molarity of Pb of 4.3 × 10⁻⁸ M. There are 0.54 g of Pb in a 60 m³ pool.

The maximum allowable concentration of lead in drinking water is 9.0 ppb, that is, 9.0 μg of Pb per liter of water.

We want to calculate the molarity (M) of the solution. We will use the following expression, assuming that the volume of water is equal to the volume of the solution.

M = mass Pb / molar mass Pb × liters of solution

M = (9.0 × 10⁻⁶ g) / (207.2 g/mol) × 1 L = 4.3 × 10⁻⁸ M

To calculate the mass of Pb in a 60 m³ pool, we need to consider that 1 m³ = 1000 L.

60 m³ Water × (1000 L Water/ 1 m³ Water) = 60,000 L Water

60,000 L Water × (9.0 × 10⁻⁶ g Pb/1 L Water) = 0.54 g Pb

Drinking water with a concentration of Pb of 9.0 ppb, has a molarity of Pb of 4.3 × 10⁻⁸ M. There are 0.54 g of Pb in a 60 m³ pool.

Learn more about parts per billion here: https://brainly.com/question/13290253

At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. What partial pressure of He would give a solubility of 0.730 M

Answers

Answer: Partial pressure of He that would give a solubility of 0.730 M is 15.5 atm

Explanation:

Henry's law states that the amount of gas dissolved or molar solubility of gas is directly proportional to the partial pressure of the liquid.

To calculate the molar solubility, we use the equation given by Henry's law, which is:

[tex]C_{He}=K_H\times p_{liquid}[/tex]

where,

[tex]K_H[/tex] = Henry's constant =?

[tex]p_{He}[/tex] = partial pressure = 1.7 atm

Putting values in above equation, we get:

[tex]0.080=K_H\times 1.7atm\\\\K_H=0.047Matm^{-1}[/tex]

To find partial pressure of He would give a solubility of 0.730 M

[tex]0.730=0.047Matm^{-1}\times p_{liquid}[/tex]

[tex]p_{liquid}=15.5atm[/tex]

Thus partial pressure of He that would give a solubility of 0.730 M is 15.5 atm

We have that from the Question, it can be said that   The partial pressure of He would give a solubility of 0.730 M is

P_2=4.7atm

From the Question we are told

At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. What partial pressure of He would give a solubility of 0.730 M

Generally the equation for constant temperature  is mathematically given as

[tex]\frac{C_2}{C_1}=\frac{P_2}{P_1}\\\\Therefore\\\\P_2=\frac{P_1C_1}{C_1}\\\\P_2=\frac{0.22*1.7}{0.080}\\\\P_2=4.7atm\\\\[/tex]

Therefore

The partial pressure of He would give a solubility of 0.730 M is

P_2=4.7atm

For more information on this visit

https://brainly.com/question/19007362?referrer=searchResults

You will begin by diluting 5.00 mL of a 0.8 M oxalic acid stock solution with water to a final volume of 100.00 mL. What will be the final concentration of the oxalic acid

Answers

Answer:

0.04M

Explanation:

The following were obtained from the question:

C1 = 0.8M

V1 = 5mL

V2 = 100mL

C2 =?

The final concentration of the diluted solution can be obtained by doing the following:

C1V1 = C2V2

0.8 x 5 = C2 x 100

Divide both side by 100

C2 = (0.8 x 5) /100

C2 = 0.04M

The concentration of the diluted solution is 0.04M

Be sure to answer all parts. In the electrolysis of molten BaI2, (a) What product forms at the negative electrode? (b) What product forms at the positive electrode? You do not need to include the states of matter in your answer.

Answers

Answer:

(a) Barium is produced at the negative electrode

(b) Iodine is produced at the positive electrode

Explanation:

When  an electric current is passed through a solution containing electrolyte, a non spontaneous reaction is stimulated. This results in the flow of positively charged ions to negatively charged electrodes(cathode) and negatively charged ions to positively charged electrodes(anode)

When an electric current is passed through molten [tex]BaI_{2}[/tex] in the electrolytic cell, the following reactions takes place:

                                            [tex]BaI_{2}[/tex] → [tex]Ba^{2+}[/tex] + 2[tex]I^{-}[/tex]

At the anode;

Iodine ions will lose an electron and will be oxidized to iodine

[tex]2I^{-}[/tex] [tex]I_{2}[/tex] + [tex]e^{-}[/tex]

At  the cathode;

Barium ions gains electrons and its reduced to barium metal

[tex]Ba^{2+}[/tex] + [tex]2e^{-}[/tex] → Ba

Final answer:

In the electrolysis of molten BaI2, Barium forms at the negative electrode, and Iodine forms at the positive electrode.

Explanation:

In the electrolysis of molten BaI2, different products form at the negative and positive electrodes. At the negative electrode, also known as the cathode, reduction occurs and Barium (Ba) is formed as a result of Ba2+ ions gaining electrons. On the other hand, at the positive electrode, known as the anode, oxidation happens and Iodine (I2) is formed as a result of I- ions losing electrons.

Learn more about Electrolysis here:

https://brainly.com/question/33301115

#SPJ11

Suppose an aluminum- nuclide transforms into a phosphorus- nuclide by absorbing an alpha particle and emitting a neutron. Complete the nuclear chemical equation below so that it describes this nuclear reaction.

____ → 30P15 + 1n0

Answers

Explanation:

An alpha particles is basically a helium nucleus and it contains 2 protons and 2 neutrons.  

Symbol of an alpha particle is [tex]^{4}_{2}\alpha[/tex]. Whereas a neutron is represented by a symbol [tex]^{1}_{0}n[/tex], that is, it has zero protons and only 1 neutron.

Therefore, reaction equation when an aluminum- nuclide transforms into a phosphorus- nuclide by absorbing an alpha particle and emitting a neutron is as follows.

        [tex]^{27}_{13}Al + ^{1}_{0}n \rightarrow ^{30}_{15}P + ^{1}_{0}n[/tex]

Final answer:

In a nuclear reaction where an aluminum nuclide absorbs an alpha particle and emits a neutron to become a phosphorus nuclide, the balanced equation is ²⁷₁₃Al + ⁴₂α → ³⁰₁₅P + ¹₀n.

Explanation:

When an aluminum nuclide absorbs an alpha particle and emits a neutron to transform into a phosphorus nuclide, we must consider both mass and atomic numbers for conservation in the nuclear reaction equation. Based on atomic numbers, aluminum with Z=13 will turn into phosphorus with Z=15 by absorbing an alpha particle (Helium nucleus) with a mass number of 4 and an atomic number of 2.

In terms of mass numbers, since a neutron (mass number of 1) is emitted from the aluminum, the mass number of the final phosphorus nuclide would be the mass number of aluminum (27) plus the mass number of the alpha particle (4), minus the mass number of the neutron (1), resulting in a phosphorus nuclide with a mass number of 30, which is phosphorus-30. The balanced nuclear equation is:

For each of the following situations, state the probability rule or rules that you would use and apply it or them. Write a sentence explaining how the situation illustrates the use of the probability rules. (a) The probability of event A is 0.417. What is the probability that event A does not occur

Answers

The question is incomplete. So, the complete question is:

For each of the following situations, state the probability rule or rules that you would use and apply it or them. Write a sentence explaining how the situation illustartes the use of the probability rules. (a) The Probability of event A is 0.417. What is the probability that even A does not occur? (b) A coin is tossed 4 times. The probability of zero heads is 1/16 and the probability of zero tails is 1/16. What's the probability that all four tosses result in the same outcomes? (c) Refer to part b, what's the probability that there is at least one head and at least one tail? (d) The probability of event A is 0.4 and the probability of event B is 0.8. Events A and B are disjoint. Can this happen? (e) Event A is rare. Its probability is -0.04. Can this happen?

Answer and Explanation:

(a) P(A)=0.417

Since it's wanted to known the probability of not occuring,

P(A') = 1 - P(A)

P(A') = 1 - 0.417

P(A') = 0.583

The probability of event A not occuring is 0.583.

(b) If the coin is fair, the probability of either head or tail is 1/2. Since, there were 4 tosses, the probability for total outcomes would be 1/16.

For all heads: P(H) = 1/16;

For all tail: P(T) = 1/16:

As it wants "either all heads OR all tails", it will be

P = P(H)+P(T)

P = 1/16+1/16

P = 1/8 = 0.125

The probability of all heads or all tails is 0.125.

(c) The probability of at least one head or one tail is the probability of NOT being all heads and all tails, so:

1 - 0.125 = 0.875

The probability of at least one of each is 0.875.

(d) Yes, events A and B can be disjoint if their intersection is zero:

P(A∩B) = 0 and it also means the events are mutually exclusive.

(e) No, probability can not be negative, because an event has to occur to calculate probability and a set of numbers fo the event is positive.

Final answer:

To calculate the probability of event A not occurring when P(A) = 0.417, the complement rule is applied: P(~A) = 1 - P(A), yielding P(~A) = 0.583. This exemplifies the complement rule where the probabilities of an event and its complement must sum to 1.

Explanation:

The probability that event A occurs is given as P(A) = 0.417. To find the probability that event A does not occur, we use the complement rule, which is based on the principle that the sum of the probabilities of all possible outcomes in a sample space is 1. Therefore, P(~A) = 1 - P(A).

By applying this rule, we can calculate the probability that event A does not occur as follows:

P(~A) = 1 - P(A)P(~A) = 1 - 0.417P(~A) = 0.583

This situation illustrates the use of the complement rule because event A and event 'not A' are mutually exclusive and collectively exhaustive; thus, they must sum up to a probability of 1. The complement rule is particularly useful when it is easier to calculate the probability of an event not happening than the event happening.

Calculate the number of grams of Mg needed for this reaction to release enough energy to increase the temperature of 78 mL of water from 29 ∘C to 78 ∘C.

Answers

Final answer:

To calculate the number of grams of Mg needed for this reaction, use the equation q = mcΔT. By rearranging the equation and substituting the values, you can determine the energy released by the reaction, and then convert it to grams of Mg using the molar mass.

Explanation:

To calculate the number of grams of Mg needed for this reaction, we need to use the equation q = mcΔT. We know the initial and final temperatures of the water, as well as the mass and specific heat capacity of water. By rearranging the equation and substituting the values, we can calculate the energy released by the reaction, and then use the molar mass of Mg to determine the number of grams needed.

Let's go through the steps:

Calculate the energy required to increase the temperature of the water using q = mcΔT.Convert the energy to kilojoules by dividing by 1000.Use the molar mass of Mg (24.31 g/mol) to convert the energy to grams of Mg using the equation: grams = energy (kJ) / ΔH (kJ/mol).

After performing these calculations, the number of grams of Mg needed for this reaction to release enough energy to increase the temperature of the water from 29 °C to 78 °C is approximately 0.24 g.

Learn more about calculating energy released in a reaction here:

https://brainly.com/question/34168664

#SPJ12

Final answer:

To increase the temperature of 78 mL of water from 29°C to 78°C, 1.36 grams of Magnesium is required given the specific heat capacity of water and the heat of combustion of Magnesium.

Explanation:

Firstly, we need to calculate the amount of energy required to heat water from 29°C to 78°C. The specific heat capacity of water is 4.184 J/g°C, and the volume of water is 78 mL, which is equivalent to 78 grams (1 ml of water = 1 gram). To find the energy required, we use the formula Q = m × c × ∆T, where Q is the heat energy required, m is the mass, c is the specific heat capacity, and ∆T is the change in temperature. So,

Q = (78g) × (4.184 J/g°C) × (78°C - 29°C) = 15950.688 Joules

This is the amount of energy we need. Now we need to know how much Mg is needed to produce this energy. Given that Mg reacts to release 11.7 kJ (or 11700 Joules) per gram, we can set up the following equation to solve for mass:

Energy = mass × heat of combustion

Therefore, mass = Energy/Heat of combustion = 15950.688 J / 11700 J/g = 1.36 g

Thus, 1.36 grams of Mg are needed to increase the temperature of 78 mL of water from 29°C to 78°C.

Learn more about Energy Calculation here:

https://brainly.com/question/31994371

#SPJ11

At a particular temperature, Kp 0.25 for the reaction a. A ask containing only N2O4 at an initial pressure of 4.5 atm is allowed to reach equilibrium. Calculate the equilibrium partial pressures of the gases. b. A ask containing only NO2 at an initial pressure of 9.0 atm is allowed to reach equilibrium. Calculate the equilibrium partial pressures of the gases. c. From your answers to parts a and b,does it matter from which direction an equilibrium position is reached?

Answers

Answer:

a.  pNO₂ = 1 atm    pN₂O₄ = 4 atm

b.  pNO₂ = 1 atm    pN₂O₄ = 4 atm

c. It does not matter.

Explanation:

From the information given in this question we know the equilibrium involved is

N₂O₄ (g) ⇄ 2 NO₂ (g)

with Kp  given by

Kp = p NO₂²/ p N₂O₄ = 0.25

We know that if we place 4.5 atm of N₂O₄ is placed in a flask, a quantity x is going to be consumed producing 2x atm of NO₂  and we can setup the following equation:

0.25 =  p NO₂²/ p N₂O₄ =  (2x)² / (4.5 - x)

0.25 x  (4.5 - x) = 4x²

4x² + 0.25 x - 1.125 = 0

after solving this quadratic equation, we get two roots

x₁ = 0.5

x₂ = -0.56

the second root is physically impossible, and the partial pressures for x₁ = 0.5  will be

pNO₂ = 2 x 0.5 atm = 1.0 atm

pN₂O₄ = (4.5 - 0.5) atm = 4.0 atm

Similarly for part b, we get the equilibrium equation

0.25 = (9- 2x)² / x

0.25x = 81 - 36x + 4x²

the roots of this equation are:

x₁ = 5.0625

x₂ = 4

the first root is physically impossible since it will give us a negative partial pressure of N₂O₄ :

p N₂O₄ = 9 - 2(5.0625) = -1.13

the second root give us the following partial pressures:

p N₂O₄ = (9 - 2x4) atm = 1 atm

p NO₂ = 4 atm

The partial pressures are the same, it does not matter from which direction an equilibrium position is reached since what is essential is that the partial pressures of the gasses N₂O₄ and  NO₂ obey the equilibrium equation.

Lead (II) carbonate decomposes to give lead (II) oxide and carbon dioxide: PbCO 3 (s) PbO (s) CO 2 (g) ________ grams of lead (II) oxide will be produced by the decomposition of 8.75 g of lead (II) carbonate

Answers

Answer:

We will have 7.30 grams lead(II) oxide

Explanation:

Step 1: Data given

Mass of lead (II)carbonate = 8.75 grams

Molar mass PbCO3 = 267.21 g/mol

Step 2: The balanced equation

PbCO3 (s) ⇆ PbO(s) + CO2(g)

Step 3: Calculate moles PbCO3

Moles PbCO3 = mass / molar mass

Moles PbCO3 = 8.75 grams / 267.21 g/mol

Moles PbCO3 = 0.0327 moles

Step 4: Calculate moles PbO

For 1 mol PbCO3 we'll have 1 mol PbO and 1 mol CO2

For 0.0327 moles PbCO3 we'll have 0.0327 moles PbO

Step 5: Calculate mass PbO

Mass PbO = moles PbO * molar mass PbO

Mass PbO = 0.0327 moles * 223.2 g/mol

Mass PbO = 7.30 grams

We will have 7.30 grams lead(II) oxide

True or False: Jumpstart is a fast-paced method for identifying problems and solutions in a single session that can be used within other methods such as Rummler-Brache, Scrum, and TQM.

Answers

Answer:

The answer is: False.

Explanation:

Six Sigma is a methodology for continuous improvement that increases performance by controlling variability and focusing the process on customer specifications. It will be used within other methods such as Rummler: Brache, Scrum and TQM.

JumpStart is an educational media franchise for children, consisting mainly of educational games, produced by JumpStart Games.

The answer is: False.

Final answer:

Jumpstart is a fast-paced method that can be used within other methods such as Rummler-Brache, Scrum, and TQM to identify problems and solutions in a single session.

Explanation:

The statement is true. Jumpstart is a fast-paced method that can be used within other methods such as Rummler-Brache, Scrum, and TQM to identify problems and solutions in a single session. Jumpstart involves bringing together a diverse group of stakeholders who have knowledge and expertise relevant to the problem at hand. The session is structured, time-boxed, and facilitated to engage participants in generating ideas, analyzing data, and developing potential solutions.

Learn more about Jumpstart method here:

https://brainly.com/question/33418889

#SPJ3

Which of the following aqueous solutions are good buffer systems? . 0.29 M perchloric acid + 0.15 M potassium perchlorate 0.16 M potassium acetate + 0.26 M acetic acid 0.18 M hydrofluoric acid + 0.12 M sodium fluoride 0.31 M hypochlorous acid + 0.28 M potassium hypochlorite 0.35 M ammonium bromide + 0.32 M ammonia

Answers

Answer:

Good buffer systems are:  

Option B)  Potassium acetate (KCH3COO) + acetic acid (CH3COOH).

Option C: Hydrofluoric acid (HF) + sodium fluoride (NaF)

Option D: Hypochlorous acid (HClO) + potassium hypochlorite (KClO):

Option E: Ammonium bromide (NH4Br) + ammonia (NH3)

Explanation:

Buffers consist in a mixture of a weak acid with its salt or a weak alkaly with its salt. All buffer systems are conformed by:

1) Weak acid + salt formed with conjugated base of the acid

or

2) Weak alkaly + salt formed with conjugated acid of the alkaly

It is very important these salts come from the weak acid or weak alkaly. It means, the anion of the acid must be the anion in the salt which is going to be part of the buffer system. On the other hand, the cation of the weak alkaly must be the cation of the salt which is going to form the salt in the buffer system.

Then, when we evaluate all options in this exercise, answers are the following:

Option A) Perchloric acid (HClO4)  + potassium perchlorate (KClO4).

It is not a buffer system because HClO4 is a strong acid. A buffer requires a weak acid or weak alkaly.  KClO4 is a salt formed by the conjugated base of HClO4, but a buffer requires two condition:  Weak acid or alkaly + its salt.

Option B)  Potassium acetate (KCH3COO) + acetic acid (CH3COOH).

This mixture is a buffer because it is formed by a weak acid (acetic acid)  and its salt (KCH3COO is a salt coming from weak acid ---CH3COOH---).

Buffer component reactions:

Reaction weak acid:     CH3COOH + H2O <-----> H3O+ + CH3COO-

Reaction salt in water:  KCH3COO ---> K+ + CH3COO-

CH3COO- is the anion of the weak acid so it must be part of the salt in the buffer system. Then KCH3COO is a salt from CH3COOH.

Option C: Hydrofluoric acid (HF) + sodium fluoride (NaF)

This mixture is a buffer because it is formed by a weak acid (Hydrofluoric acid)  and its salt (NaF is a salt coming from weak acid ---HF---).

Buffer component reactions:

Reaction weak acid:     HF + H2O <-----> H3O+ + F-

Reaction salt in water:  NaF ---> Na+ + F-

F- is the anion of the weak acid so it must be part of the salt in the buffer system. Then NaF is a salt from HF.

Option D: Hypochlorous acid (HClO) + potassium hypochlorite (KClO):

It is a buffer because it is formed by a weak acid (hypochlorous acid)  and its salt (KClO is a salt coming from weak acid ---HClO---).

Buffer component reactions:

Reaction weak acid:     HClO + H2O <-----> H3O+ + ClO-

Reaction salt in water:  KClO ---> K+ + ClO-

ClO- is the anion of the weak acid so it must be part of the salt in the buffer system. Then KClO is a salt from HClO.

Option E: Ammonium bromide (NH4Br) + ammonia (NH3)

The combination of this weak alkaly (NH3) and the salt (ammonium bromide, NH4Br) is a buffer becuase it is formed by a weak compound and its salt.

Buffer component reactions:

Reaction weak alkaly:    NH3 + H2O <-----> NH4+ + OH-  

Reaction salt in water:    NH4Br ---> NH4+ + OH-

NH4+ is the cation of the weak alkaly so it must be part of the salt in the buffer system. Then NH4Br is a salt from NH3.

Remember a buffer is formed by the combination of two different chemical sustances:  Weak acid or Weak alkaly plus its salt.

Final answer:

Good buffer systems consist of a weak acid and its conjugate base or a weak base and its conjugate acid, capable of resisting changes in pH when acids or bases are added. Examples include mixtures of acetic acid with potassium acetate, hydrofluoric acid with sodium fluoride, hypochlorous acid with potassium hypochlorite, and ammonium bromide with ammonia.

Explanation:

Good buffer systems are made of a combination of a weak acid and its conjugate base, or a weak base and its conjugate acid. From the given options, a buffer system can be represented as follows:

0.16 M potassium acetate + 0.26 M acetic acid

0.18 M hydrofluoric acid + 0.12 M sodium fluoride

0.31 M hypochlorous acid + 0.28 M potassium hypochlorite

0.35 M ammonium bromide + 0.32 M ammonia

Each of these systems includes a weak acid or base along with its salt, which is made up of the conjugate base or acid. This combination allows the buffer to resist changes in pH when small amounts of acids or bases are added. For example, when considering acetic acid and sodium acetate as components of the buffer, the addition of a strong acid like HCl will react mainly with the acetate ions rather than causing a large change in pH.

The partial Lewis structure that follows is for a hydrocarbon molecule. In the full Lewis structure, each carbon atom satisfies the octet rule, and there are no unshared electron pairs in the molecule. The carbon-carbon bonds are labeled 1, 2, and 3.
C =C - C =-C
Rank the carbon-carbon bonds in order of decreasing bond length.

Answers

Answer:

[tex]C-C> C=C> C\equiv C[/tex]

So, 2 [tex]>[/tex] 1 [tex]>[/tex] 3

Explanation:

Carbon is a  non-metal and has 6 electrons. In the excited state, it contains 4 electrons in its outermost shell and so 4 electrons take place in covalent bond formation. In a molecule , 2 carbon atoms can be bound by a single bond, the double bond and by a triple bond. Since the bond length of [tex]C\equiv C[/tex] is 120 pm, the bond length of [tex]C=C[/tex] is 134 pm and the bond length of [tex]C-C[/tex] is 154 pm. Thus in the given compound, [tex]C= C-C\equiv C[/tex] , in which [tex]C= C[/tex] is labeled as 1,  [tex]C-C[/tex] is labeled as 2 and [tex]C\equiv C[/tex] is labeled as 3. So the bond length of carbon-carbon bonds in the molecule, in decreasing order is [tex]2 > 1 >3[/tex].

Other Questions
Which occurrence would lead you to conclude that lights are connected in aparallel circuit?OA. When one bulb burns out, a small section of lights goes out.OB. When one bulb burns out, all the other lights stay lit.OC. When one bulb burns out, a circuit breaker is tripped.OD. When one bulb burns out, all the lights go out. Ian does not have much of a relationship with his subordinates. They feel obligated to follow his directions regarding work activities because he's the boss. This is an example of __________ power. The random variables X and Y have the joint PMF pX,Y(x,y)={c(x+y)2,0,if x{1,2,4} and y{1,3},otherwise. All answers in this problem should be numerical. Find the value of the constant c . c= The temperature at which a solid melts is not characteristic if a compound nor an element in general terms, what two general factors in a medium affect small speed of sound? Please explain! I will give brainliest! The floor of a rectangular room is to be tiled with 1/3 foot square tiles along a 9 3/8 foot wall. How many tiles will be needed along the wall? Juan wants to start a lemonade stand to earn money.He needs money to purchase the materials before hecan sell the lemonade and earn money. His motheragrees to loan him $10. He makes a list of the items hewants to buy. The normal boiling point of a certain liquid is , but when of urea are dissolved in of , it is found that the solution boils at instead. Use this information to calculate the molal boiling point elevation constant of . The normal application of a p-chart is in______________.a. acceptance sampling by attributes.b. process sampling by attributes.c. process capability ratio computations.d. process sampling by variables.e. acceptance sampling by variables. As the human population grows, some minerals in everyday products could become scarce. Which of the following is the best way to address this problem?A. Move human communities to uninhabited areas.B. Explore uses of more plentiful minerals.C. Use more energy to locate existing minerals.D. Construct more and larger-sized landfills. Which details from the passage best demonstrate that Tessa has developed professionally over the course of the narrative?Select True or False for each statement.TrueFalseTessa realizes halfway through camp that Varicks work is better than hers.Tessa adapts her plan when the museum rejects her request to film her final scene in that location.Tessa is jealous of Varicks work when she sees it.Tessa appreciates Varick's good influence when the instructors seem impressed by her film. Question 6Name the image of F(-3, 1) after being translated along the vector . Note: Enter your answer and show all the steps that you use to solve this problem in the space provided.Using the three indicated points on the given line and the concept of similar triangles, show and explain why the slope of the line is the same between any two of these three points. Calculate the slope of the line. ASSUME that in 25 years you will need $500,000 for your retirement (i.e. retirement is actually 25 years away, and you want to have saved $500,000). How much money would you have to put into a bank today to accumulate this if your money will earn 8% per year (assume annual compounding)?a.73,009b.166,365c.211, 573d.676,001e.insufficient information to compute An employer has a duty to indemnify, or compensate an employee for any losses suffered as a result of authorized legal acts that the employee performs under the employment agreement.(A) True(B) False Keira is using the software development life cycle to create a new app. She has the pseudocode for her program. Which stage of the software development life cycle is Keira ready for next? Select the correct answer. Parker is designing the compensation package for a candidate selected for the position of a software developer. Which factor should he consider during the process? A. candidates age B. candidates family background C. candidates skill set D. candidates nationality E. candidates hobbies Starting around the onset of puberty, the strength per kilogram body mass in boys ________________ and strength per kilogram body mass in girls _______________. The equation for line bis y = -2x + 3. Line c is the result of dilating line b by a factorof 2 with center (0, -2). What is the equation for line c? A hominin (human family) skull was found in a shale layer between two fine-grained igneous rock layers. There were no baked zones on the rocks above the igneous layers. The skull had been 100% fossilized and changed to stone; there was no original skull material left. On the basis of this information, decide which of the following statements is true.a. The skull should be dated by the carbon-14 method, since this is the method used for organic material older than 1 million years.b. The igneous layers can be dated by radiometric methods; the shale layers cannot be dated radiometrically.c. The skull itself cannot be dated, because it is no longer organic material and it is not igneous material. The age of the skull is determined by its position between the igneous layers.d. The igneous layers must be lava flows, because they are fine-grained rock and there are no baked zones on the rock above them. Steam Workshop Downloader