How many sublevels are used with elements on the periodic table in energy level 5? (hint: when filling orbitals how many sublevels will have the designation of 5?)?

Answer: tetrahedral

Explanation:

Hybridization is calculated using the Lewis dot structures of all the compounds.

Formula used to calculate the number of atomic orbitals around central metal atom is:

Number of atomic orbitals around central metal atom = Number of bond pairs + Number of lone pairs

Bond pairs for a double bond and triple bond is taken as 1 only.

Given:  Number of bond pairs = 4

Number of lone pairs = 0

If Number of atomic orbitals around central metal atom are 4 , the hybridization is [tex]sp^3[/tex] and electron domain geometry is tetrahedral.

Answer:

The atomic number represents or stands for the distinct identity of a chemical element. It is usually defined as the number or protons present in an atom of an element, which is also equal to the number of electrons.

Explanation:

Final answer:

The concentration of hydroxide ion in a solution of methylamine is approximately 9.07 x 10^-7 M.

Explanation:

The concentration of hydroxide ion in a solution of methylamine can be found by using the relation:

Kw = [H+][OH-]

Given that the Kb for methylamine is 4.4 x 10-4, we can calculate the concentration of hydroxide ion using the formula:

[OH-] = sqrt(Kw/Kb) = sqrt(1.0 x 10-14/4.4 x 10-4)

Substituting the values and solving, we find that the concentration of hydroxide ion in the solution is approximately 9.07 x 10-7 M.

Final answer:

A soft element that can be cleanly cut with a knife is likely a metal due to metals being malleable and ductile, in contrast to the brittleness of nonmetals.

Explanation:

An element that is soft and can be easily cut with a knife is likely to be a metal. This observation is in line with the known properties of metals. Metals are known to be good conductors of electricity and heat, shiny, silvery, solid, and exhibit malleability which allows them to be hammered or pressed into thin sheets, and ductility which means they can be drawn out into thin wires.

On the other hand, nonmetals are usually brittle in their solid forms and do not have the malleability that metals possess. Based on these definitions and properties, the characteristics of being soft and easily cut suggest that the element in question exhibits metallic properties. Alkali metals, in particular, are known for their softness and can indeed be cut with a simple lab spatula.

To find the amount of CO2 produced from the limestone sample, apply the ideal gas law to convert the given volume and conditions to moles and subsequently to grams. Decomposition equations for CaCO3 and MgCO3 are provided. The percentage of limestone as CaCO3 and the mass of magnesium-containing product after decomposition are calculated using the given sample data.

A sample of dolomitic limestone containing only CaCO3 and MgCO3 was analyzed. When a 0.2800-gram sample was decomposed by heating, certain measurements of CO2 were recorded. To calculate the grams of CO2 produced, we would convert the volume of CO2 gas given in milliliters to liters, use the ideal gas law PV = nRT to find the number of moles of CO2, and then convert those moles to grams using the molar mass of CO2.

The decomposition reactions for both carbonates would be as follows:

To find the percentage of the limestone that was CaCO3, the mass of calcium in CaCO3 is used in ratio with the total mass of the sample:

Percentage of CaCO3 = (mass of Ca in CaCO3 / total mass of the sample) * 100%

The mass of the magnesium-containing product (MgO) present in the sample after heating can be calculated if the mass of MgCO3 initially present is known, or by subtraction of the mass of CaCO3 decomposed and the CO2 evolved from the original sample mass.

https://brainly.com/question/37868891

#SPJ3

The balanced equation for the reaction between sodium carbonate and nickel(II) chloride is Na2CO3(aq) + NiCl2(aq) -> NiCO3(s) + 2NaCl(aq). This means one molecule of sodium carbonate reacts with one molecule of nickel(II) chloride to produce a molecule of nickel(II) carbonate and two molecules of sodium chloride.

The chemical reaction between aqueous sodium carbonate (Na2CO3) and aqueous nickel(II) chloride (NiCl2) can be represented and balanced as follows:

This balanced molecular equation indicates that one molecule of aqueous sodium carbonate reacts with one molecule of aqueous nickel(II) chloride to produce one molecule of solid nickel(II) carbonate and two molecules of aqueous sodium chloride.

In terms of phases, the sodium carbonate and nickel(II) chloride start as aqueous (dissolved in water) compounds, while the produced nickel(II) carbonate is solid, and the sodium chloride is still aqueous.

https://brainly.com/question/34137415

#SPJ12

Answer:

Improvements in the area of uranium extraction would contribute to reducing the possibility of environmental damage by using uranium as fuel.

Explanation:

Having a uranium rod as a nuclear fuel generating energy in a fission reactor is not simple, it is a complex and costly process since the uranium ore is extracted, generating in its different stages negative environmental impacts through waste and shipments of radioactive material.

Improvements in uranium extraction would significantly reduce the environmental impact of this process, mainly in water.

Have a nice day!

The general form of a compound can be written in the form of:

[X(a) Y(b)] ^ c

Where a and b are subscripts, and c is the superscript of the whole formula.

The relationship that we can derived here between the constants is:

(valence of X) * a + (valence of Y) * b = c

Since the formula obviously has no superscript, therefore c = 0. We also know in chemistry class that the valence of Cl is -1, therefore:

valence of X * 1 + (-1) * 3 = 0

valence of X - 3 = 0

valence of X = 3

This is an example of combustion reaction, a substance is reacted with oxygen to form products. The balanced reaction for the burning of FeS2 is:

2 FeS2 + 5.5 O2 ---> 4 SO2 + Fe2O3

Therefore based on stoichiometric ratio of the reaction, for every 2 moles of FeS2, 4 moles of SO2 is produced.

First, lets calculate for the number of moles of FeS2 supplied: (molar mass of FeS2 = 119.965 g/mol)

n FeS2 = 202.33 g / (119.965 g/mol)

n FeS2 = 1.6866 mol

Calculate for the number of moles of SO2 produced using the ratio:

n SO2 = 1.6866 mol (4 / 2) = 3.373 mol SO2

Converting to mass: (molar mass SO2 = 64.066 g/mol)

m SO2 = 3.373 mol * 64.066 g/mol

m SO2 = 216.10 g         (ANSWER)

Final answer:

When 202.33 g of iron pyrite (FeS2) is burned, it reacts with oxygen to produce approximately 216.10 g of sulfur dioxide (SO2), which is a harmful air pollutant.

Explanation:

If iron pyrite (FeS2) is not removed from coal before burning, it can react with oxygen to form sulfur dioxide (SO2), which is a harmful air pollutant. To determine how much SO2 is produced from 202.33 g of FeS2 we can use stoichiometry. The balanced chemical equation for the reaction is:

4 FeS2 + 11 O2 → 2 Fe2O3 + 8 SO2

From the equation, we see that 4 moles of FeS2 produce 8 moles of SO2. First, we calculate the moles of FeS2 in 202.33 g.

Given that the molar mass of FeS2 is approximately 119.98 g/mol (55.845 g/mol for Fe and 32.065 g/mol for S, multiplied by 2 because there are two sulfurs), we perform the following calculation:

202.33 g FeS2 × (1 mol FeS2 / 119.98 g FeS2) = 1.686 moles FeS2

Applying the stoichiometry from the balanced chemical equation:

1.686 moles FeS2 × (8 moles SO2 / 4 moles FeS2) = 3.372 moles SO2

Finally, we convert moles of SO2 to grams using its molar mass (approximately 64.066 g/mol):

3.372 moles SO2 × 64.066 g/mol = 216.10 g SO2

So, 202.33 g of FeS2 would produce approximately 216.10 g of SO2 when burned.

Final answer:

The contamination that occurs from a paint chip falling in soup can be physical but may also lead to chemical contamination if the paint contains lead, which poses serious health risks.

Explanation:

If a paint chip falls into soup, the type of contamination that occurs is called physical contamination, which involves foreign objects entering foodstuffs. However, if the paint is lead-based, this can also lead to chemical contamination, as lead is a toxic substance.

When paint peels and cracks, it creates lead dust that can be hazardous if ingested. Given the risks associated with lead, it is considered a significant public health concern, particularly because lead exposure can cause serious health issues.

The ingestion of lead can be particularly dangerous for children and can lead to numerous health problems, including cognitive impairments.

The pH of a buffer solution such as the one presented, made of a weak acid and its salt, is calculated using the Henderson-Hasselbalch equation. However, without the Ka value (acid dissociation constant) for the weak acid, the exact pH cannot be calculated.

This question is relating to the concept of buffer solutions in chemistry, particularly the pH calculation of a buffer solution made from a weak acid (HCHO2) and its salt (NaCHO2). The pH of a buffer solution is calculated using the Henderson-Hasselbalch equation, which is pH = pKa + log ([A-]/[HA]). That said, the exact pH cannot be calculated without the given Ka (acid dissociation constant) value for HCHO2. However, with the PH and Ka values, one would substitute the values in the equation to obtain the final pH of the solution.

https://brainly.com/question/34217738

#SPJ12

To find the pH of a solution containing 0.20 M HCHO₂ and 0.15 M NaCHO₂, use the Henderson-Hasselbalch equation. Given the pKa of 3.75 for formic acid, the pH is calculated to be approximately 3.63.

Calculating the pH of a Solution Containing HCHO₂ and NaCHO₂

To determine the pH of a solution that is 0.20 M in HCHO₂ and 0.15 M in NaCHO₂, we can use the Henderson-Hasselbalch equation:

pH = pKa + log ([A⁻]/[HA])

For formic acid (HCOOH, also denoted as HCHO₂), the pKa is approximately 3.75.

Step-by-Step Calculation:

Identify the concentration of the acid (HCHO₂) and its conjugate base (CHO₂⁻, provided by NaCHO₂).

Substitute the values into the Henderson-Hasselbalch equation:

Given: [HCHO₂] = 0.20 M, [NaCHO₂] = 0.15 M, pKa = 3.75

pH = 3.75 + log (0.15 / 0.20)

3. Calculate the log term:

log (0.15 / 0.20) = log (0.75) ≈ -0.125

4. Add the terms together:

pH = 3.75 - 0.125 = 3.625

Therefore, the pH of the solution is approximately 3.63.

Answer: Option (b) is the correct answer.

Explanation:

In the given molecule, there are five carbon atoms attached linearly to each other will single bonds only.

So, it is known that when a compound contains only carbon and hydrogen atoms attached  single bondedly to each other then this type of hydrocarbon is known as alkane.

Their general formula is [tex]C_{n}H_{2n+2}[/tex], where n is the number of carbon atoms present. Suffine "ane" is added to the name of alkane.

Thus, we can conclude that name of the given hydrocarbon is pentane.

For 4.0 moles of magnesium to react completely, 2.0 moles of oxygen gas are needed, as per the stoichiometry of the balanced chemical reaction between magnesium and oxygen.

The number of moles of oxygen gas needed to react with 4.0 moles of magnesium can be determined by using the balanced chemical reaction: 2Mg(s) + O₂(g) → 2MgO(s). This equation tells us that two moles of magnesium react with one mole of molecular oxygen to form magnesium oxide. Therefore, if you have 4.0 moles of magnesium, you will need 2.0 moles of oxygen gas to fully react with all the magnesium.

https://brainly.com/question/30218216

#SPJ3

The name of the element that is a member of the alkali metal family whose most stable ion contains 2 electrons is "Ba (barium).

A pure substance made up entirely of atoms with almost the identical count of protons in respective nuclei was known as an element.

It is known that Ba element can form +2 oxidation state very easily which belongs to the group 1.

Therefore, the name of the element that is a member of the alkali metal family whose most stable ion contains 2 electrons is "Ba (barium).

To know more about element .

https://brainly.com/question/13025901

#SPJ2

Answer:

Its B

Explanation:

The kilowatt-hours of electricity are used to produce 4.50 kg of magnesium in the electrolysis of molten MgCl₂ with an applied emf of 5.00 v is 49.63 kW-h. It can be find by knowing the half reaction of magnesium.

A half reaction is either the oxidation or reduction reaction component of a redox reaction.

Let's determine the half reaction of magnesium ;

Mg²⁺ + 2e- => Mg

Given the mass of magnesium metal that is produced, we calculate the total charge of the electrolysis by the relations we can get from the half reaction. We do as follows :

4.50 kg Mg ( 1000 g / 1 kg ) ( 1 mol / 24.305 g ) ( 2 mol e- / 1 mol Mg ) (96500 C / 1 mol e-) = 35733388.2 C

We are given the applied EMF in units of V. This value is equal to J/C. So, 5 V is equal to 5 J/C.

35733388.2 C (5 J/C) = 178666941 J

178666941 J ( 1 kW-h / 3.6x10^6 J ) = 49.63 kW-h

Hence, The kilowatt-hours of electricity are used to produce 4.50 kg of magnesium in the electrolysis of molten MgCl₂ with an applied emf of 5.00 v is 49.63 kW-h.

Learn more about redox reaction here ;

https://brainly.com/question/13978139

#SPJ5

To complete the chart, we need to determine the number of valence electrons for each element. Starting from Period 1, we place electrons in the subshells according to the periodic table.

Start at Period 1 of Figure 2.8.2. Place two electrons in the 1s subshell (1s²). Proceed to Period 2 (left to right direction). Place the next two electrons in the 2s subshell (2s²) and the next six electrons in the 2p subshell (2pº).

SO2 (5.00 g) and CO2 (5.00 g) are placed in a 750.0 ml container at 50.0 °C. the partial pressure of SO2 in the container was 2.762 atm.

To calculate the partial pressure, we can calulate the total pressure

[tex]Total pressure =  \frac{nRT}{V} SO2  + \frac{nRT}{V} CO2[/tex]

Where:

The amount of SO2 is n SO2 = mass/molar mass = m/M = [tex]\frac{5 }{32} + 16*2 = 0.078125[/tex] mol

The amount of CO2 is n CO2 = mass/molar mass = m/M = [tex]\frac{5}{14} + 16*2 = 0.1[/tex] mol

Total amount of gas is n(total) = [tex]n1 + n2 = 0.078 + 0.113 = 0.191[/tex]  mol

T = 50+273 = 323 K

[tex]V = \frac{750}{1000} = 0.75 [/tex]liters

Total Pressure  [tex]p*V = n*R*T[/tex]

Total Pressure [tex]= (0.078125*0.0821*\frac{323}{0.75} ) + (0.1*0.0821*\frac{323}{0.75}) = 2.7623 + 3.535 = 6.298[/tex] atm

Partial pressure = x SO2 * Total Pressure = [tex](\frac{no. of moles of SO2 }{total no. of moles} ) * Total pressure = (\frac{0.078125}{0.078125} +0.1) * 6.298 = 2.762 [/tex]atm

Grade:  9

Subject:  chemistry

Chapter:  pressure

Keywords:   the container, the partial pressure, SO2, CO2,  The mole fraction

The balanced chemical equation for the complete combustion of acetic acid (CH3COOH) is CH3COOH(l) + 2 O2(g)
ightarrow 2 CO2(g) + 2 H2O(l), which indicates the complete conversion of acetic acid to carbon dioxide and water.

Balanced Chemical Equation for the Combustion of Acetic Acid

The complete combustion of acetic acid (CH3COOH) involves its reaction with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) as products. The balanced chemical equation is as follows:

CH3COOH(l) + 2 O2(g)
ightarrow 2 CO2(g) + 2 H2O(l)

This reaction shows the acetic acid undergoing complete combustion in the presence of excess oxygen, ensuring all carbon is converted to carbon dioxide and all hydrogen to water, with no other products formed.

Ionization of Acetic Acid

Additionally, acetic acid can ionize in solution:

CH3COOH(aq)
ightleftharpoons H+(aq) + CH3COO
-(aq)

Because acetic acid is a weak acid, this ionization is not complete, and an equilibrium is established, favoring the reactant side. This illustrates the weak acidic nature of acetic acid in an aqueous solution.

The chemical equation that is balanced to allow acetic acid to burn completely ([tex]CH_3COOH[/tex]) is [tex]\text{CH}_3\text{COOH} + 2 \text{O}_2 \rightarrow 2 \text{CO}_2 + 2 \text{H}_2\text{O}[/tex].

The complete combustion of acetic acid ([tex]CH_3COOH[/tex]), the main active ingredient in vinegar, can be represented by a balanced chemical equation. In combustion reactions, a compound reacts with oxygen ([tex]O_2[/tex]) to produce carbon dioxide ([tex]CO_2[/tex]) and water ([tex]H_2O[/tex]).

[tex]\text{CH}_3\text{COOH} + \text{O}_2 \rightarrow \text{CO}_2 + \text{H}_2\text{O}[/tex]

Since acetic acid contains two carbon atoms, we require two [tex]CO_2[/tex] molecules:

[tex]\text{CH}_3\text{COOH} + \text{O}_2 \rightarrow 2 \text{CO}_2 + \text{H}_2\text{O}[/tex]

There are 4 hydrogen atoms in acetic acid, so we need 2 [tex]H_2O[/tex] molecules:

[tex]\text{CH}_3\text{COOH} + \text{O}_2 \rightarrow 2 \text{CO}_2 + 2 \text{H}_2\text{O}[/tex]

On the right side, there are 4 oxygen atoms in 2 [tex]CO_2[/tex] and 2 oxygen atoms in 2 [tex]H_2O[/tex], totaling 6 oxygen atoms. On the reactant side, we have 2 oxygen atoms in 1 acetic acid molecule and need 4 more from [tex]O_2[/tex], so we need 2 [tex]O_2[/tex] molecules:

[tex]\text{CH}_3\text{COOH} + 2 \text{O}_2 \rightarrow 2 \text{CO}_2 + 2 \text{H}_2\text{O}[/tex]

The final balanced equation is:

[tex]\text{CH}_3\text{COOH} + 2 \text{O}_2 \rightarrow 2 \text{CO}_2 + 2 \text{H}_2\text{O}[/tex]

A neutral salt is produced from the reaction between a strong acid and a strong base, as these completely dissociate in water and the protons from the acid neutralize the hydroxide ions from the base.

The reaction that will produce a neutral salt is the neutralization reaction between a strong acid and a strong base. When equal amounts of a strong acid like hydrochloric acid (HCl) are mixed with a strong base such as sodium hydroxide (NaOH), the products are a salt (NaCl in this case) and water (H2O), and they do not exhibit characteristics of either an acid or a base.

This is because strong acids and strong bases completely dissociate in water, giving a neutral solution as the protons (H+) from the acid neutralize the hydroxide ions (OH−) from the base, resulting in the formation of water.