Which color of visible light has the shortest wavelength?

Answer: 59 seconds

Explanation:

Answer:59 seconds

Explanation:

Answer:

The Soviet Union had become the main focus of Germany's attacks. Britain and the U.S got Italy to surrender and then invade the beaches at Normandy, diverting the Germans attention to the west.

Answer:

Voltage-gated calcium ion channels open, and calcium ions diffuse into the cell

The arrival of an action potential at the presynaptic terminal triggers a depolarization of the membrane and the opening of Na+ channels and Ca2+ channels. This leads to the fusion of synaptic vesicles with the presynaptic membrane and the release of neurotransmitters into the synapse.

When an action potential arrives at the presynaptic terminal, the membrane gets depolarized and opens voltage-gated Na+ channels. This allows Na+ ions to enter the cell and further depolarize the presynaptic membrane. As a result, voltage-gated Ca2+ channels open and allow Calcium ions into the cell. This, in turn, triggers a signaling cascade leading to the fusion of small, membrane-bound vesicles known as synaptic vesicles that contain neurotransmitter molecules with the presynaptic membrane. Finally, the neurotransmitter is released into the synapse, where it can bind to receptors on the postsynaptic cell and induce chemical reactions that will affect the cell's membrane potential.

https://brainly.com/question/30634467

#SPJ12

Answer:

Answer is A.

Explanation:

Remember the equation for work:

W = F d cos θ

Math explanation: When θ = 0, cos θ = 1, so Fd is a maximum. For any other value of θ up to 90 degrees, cos θ < 1 so Fd will be smaller. For θ = 180, you're pushing away from the direction of displacement so you're actually doing negative work.

Intuitive explanation: you have the most success pushing an object when you apply the force directly against it compared to if the force was directed at an angle.

Answer:

when the angle between the force and displacement is 0°

Explanation:

Answer:

C) a mixture of blue and red light

Explanation:

A grow light is an artificial source of light which is used to stimulate growth of plant by providing electric light appropriate for photosynthesis. These lights are used when there is no natural light available like the given situation in the question.

A mixture of Red and Blue light can be used to stimulate growth and regulate it. Red light stimulates growth while blue light regulates it. It is very cost effective solution.

Thus, option C is correct.

To maximize plant growth with a minimum of energy expenditure in a spaceship where natural sunlight is not available, a mixture of blue and red light should be used. Option C is the correct answer.

Blue light has a shorter wavelength and is essential for promoting vegetative growth, root development, and the overall health of plants. It plays a crucial role in regulating plant growth hormones and influencing various physiological processes. Option C is the correct answer.

Red light has a longer wavelength and is crucial for photosynthesis, the process by which plants convert light energy into chemical energy. Red light is absorbed by chlorophyll, the pigment responsible for capturing light energy, and is used in the synthesis of carbohydrates and other essential molecules needed for plant growth. By providing a mixture of blue and red light, the spaceship can simulate the necessary light spectrum required for optimal plant growth. This combination allows plants to efficiently utilize the light energy provided while minimizing energy expenditure.

Learn more about Sunlight here:

https://brainly.com/question/354455

#SPJ6

Answer:

the primary function of the Calvin cycle is to make organic products plants need, using the products from the light reactions of photosynthesis (ATP and NADPH).

Explanation:

hope this helped

Answer:

The capital of Prince Edward Island is Charlottetown.

Explanation:

hope this helps, and if it did, please mark brainliest :)

The capital of Prince Edward Island is Charlottetown.

The capital of Prince Edward Island, which is located in eastern North America, from Prince Edward Island to Virginia, is Charlottetown. This region spans from approximately latitude 46N to 37N, with the median latitude being around 42N, and the median longitude is near 70W. When learning about the geography of Canada, it's important to recognise Charlottetown as the capital as it plays a pivotal role in the province's governance, culture, and history.

Answer:

B. 3.75 meters/second2

Explanation:

The velocity of a car traveling in a straight line increases from 0 meters/second to 30 meters/second in 8 seconds. What is the average acceleration of the car;

acceleration = (change in velocity)/(change in time)

acceleration = ( 30 - 0)/(8)

acceleration = 3.75 meters/second2

Answer: 4.33°

Explanation:

The formula to calculate the standard deviation for a uniform distribution for interval [a,b] is given by :-

[tex]\text{Standard deviation}:\sigma=\sqrt{\dfrac{(b-a)^2}{12}}[/tex]

Given : The amount that the water temperature is raised has a uniform distribution over the interval = [tex][10^{\circ},25^{\circ}][/tex]

Then , the standard deviation of the temperature increase is given by :-

[tex]\sigma=\sqrt{\dfrac{(25-10)^2}{12}}\\\\\Rightarrow\sigma=4.33012701892\approx4.33[/tex]

Hence, the standard deviation of the temperature increase is 4.33°.

For a uniformly distributed random variable, calculate the standard deviation using the formula sqrt((b - a)^2 / 12). In this case, the standard deviation of the temperature increase is approximately 4.33 degrees Celsius.

In statistics, the standard deviation is a measure that is used to quantify the amount of variation or dispersion of a set of values. This question deals with the uniform distribution, so it's a topic in probability and statistics.

For a uniform distribution on the interval [a, b], the standard deviation can be calculated using the formula: sqrt((b - a)^2 / 12). In this case, a = 10 degrees and b = 25 degrees. So, the standard deviation of the temperature increase is sqrt((25 - 10)^2 / 12) = sqrt(225 / 12) = sqrt(18.75) which is approximately 4.33 degrees Celsius.

https://brainly.com/question/23907081

#SPJ3

(a) 18717 N

There are two forces acting on the elevator:

- The tension in the cable, T, upward

- The weight of the elevator+passenger, downward, which is given by

W = mg

where m=1700 kg is the mass and g=9.81 m/s^2 is the acceleration of gravity

According to Newton's second law, the resultant of these forces must be equal to the product between mass and acceleration:

T - mg = ma

where

a = 1.20 m/s^2 is the acceleration, also upward

Solving the equation for T, we find the tension in the cable:

[tex]T=mg+ma=m(g+a)=(1700 kg)(9.81 m/s^2)(1.20 m/s^2)=18717 N[/tex]

(b) 16677 N

In this second part of the trip, the elevator continues at constant velocity. This means that the acceleration is zero:

a = 0

So Newton's second law becomes:

T - mg = ma = 0

Therefore, the tension in the cable will be equal to the weight of the elevator+passenger:

T = mg = (1700 kg)(9.81 m/s^2)=16677 N

(c) 15657 N

In this third part of the trip, the elevator has a deceleration of

a = -0.60 m/s^2

and we use a negative sign since the acceleration is now downward.

Therefore, Newton's second law is

T - mg = ma

And substituting all the data, we find the new tension in the cable:

[tex] T=mg+ma=m(g+a)=(1700 kg)(9.81 m/s^2-0.60 m/s^2)=15657 N[/tex]

(d) 19.35 m, 0 m/s

The distance covered by the elevator in part a) of the trip is

[tex]d_1 = \frac{1}{2}at^2 = \frac{1}{2}(1.20 m/s^2)(1.50 s)^2=1.35 m[/tex]

The final velocity reached in this part is

[tex]v_1 = at=(1.20 m/s^2)(1.50 s)=1.8 m/s[/tex]

In the second part, the elevator moves at constant velocity of

[tex]v_2 = v_1 = 1.8 m/s[/tex]

so the distance covered is

[tex]d_2 = v_2 t = (1.8 m/s)(8.50 s)=15.3 m[/tex]

The distance covered in the third part will be

[tex]d_3 = v_2 t + \frac{1}{2}at^2 = (1.8 m/s)(3.0 s) + \frac{1}{2}(-0.6 m/s^2)(3.0 s)^2=2.7 m[/tex]

While the final velocity is

[tex]v_3 = v_2 + at = 1.8 m/s + (-0.6 m/s^2)(3.0 s)=0[/tex]

and the total distance covered (so, the heigth of the elevator above the ground) is

[tex]d = d_1 + d_2 + d_3 = 1.35 m +15.30 m+2.70 m=19.35 m[/tex]

To calculate the tension in the cable, use the equation Tension = mass x acceleration + weight. To find the height the elevator moved, use the equations of motion.

To calculate the tension in the cable, we need to consider the forces acting on the elevator. When the elevator accelerates upward, two forces are acting on it - the force due to its weight and the tension in the cable. The tension in the cable is given by the equation:

Tension = mass x acceleration + weight

Using this equation, we can calculate the tension in the cable for each scenario:

(a) Tension during acceleration = (1700 kg x 1.20 m/s^2) + (1700 kg x 9.8 m/s^2)

(b) Tension during constant velocity = 1700 kg x 9.8 m/s^2

(c) Tension during deceleration = (1700 kg x -0.600 m/s^2) + (1700 kg x 9.8 m/s^2)

To find how high the elevator has moved above its original starting point, we can use the equations of motion. The final velocity of the elevator can be found using the equation:

Final velocity = initial velocity + (acceleration x time)

The displacement can be found by using the equation:

Displacement = (initial velocity x time) + (0.5 x acceleration x time^2)

https://brainly.com/question/25017021

#SPj2

Answer:

447.2 mph

Explanation:

The vertical distance from the plane to the station is 1 mile.

The horizontal distance from the plane to the station is x miles.

The distance between the plane and station is therefore:

d² = 1² + x²

Taking derivative with respect to time:

2d dd/dt = 0 + 2x dx/dt

d dd/dt = x dx/dt

We know that x = 2 miles and dx/dt = 500 mi/hr.  We need to find d when x=2.

d² = 1² + 2²

d² = 5

d = √5

Therefore:

√5 dd/dt = (2) (500)

dd/dt = 1000/√5

dd/dt = 200√5

dd/dt ≈ 447.2 mph

Answer:

Zero

Explanation:

The work done by a force on an object is given by:

[tex]W=Fd cos \theta[/tex]

where

F is the magnitude of the force

d is the displacement of the object

[tex]\theta[/tex] is the angle between the direction of the force and the displacement

In this problem, the force is the gravitational attraction between the Earth and the Sun, which points always towards the Sun. Therefore, the force is always perpendicular to the displacement of the Earth (which moves tangentially to its circular path). As a result, the angle in the formula is 90 degrees, which means that the cosine part is zero: so, the work done by the gravitational force is always zero, because the force is always perpendicular to the displacement.

Answer:  The air gets warmer and rises then it goes back toward the poles

Explanation: Hope this helps, tell me if it didn't.

Answer:

Towards the right

Explanation:

The equator is the region which receives maximum amount of sunlight. Due to this, the area experiences more heat and the air in this region becomes warm, and less dense. It then slowly rises up, forming a low pressure zone. This air is then carried by the wind towards both the poles. The wind that carries the air towards the north gets slightly deflected towards the right side because of a force known as the Coriolis force. This force is created due to the rotation of the earth.

Nuclear fission consists of dividing a heavy nucleus into two or more lighter or smaller nuclei, by means of the bombardment with neutrons to make it unstable. In this process that takes place in the atomic nucleus, neutrons, gamma rays and large amounts of energy are emitted.  

Then, with this division a great release of energy occurs and the emission of two or three neutrons, other particles and gamma rays.  

This means fission is a process in which energy is released by  the separation of the components of the nucleous of the atom.

In other words:

Hawaii Volcanoes National Park was established as part of the process wherein Hawaii transitioned from an independent kingdom to a U.S. territory and state. The park is significant for tourism and the study of volcanic activity in Hawaii, representing a critical part of the island's modern development pattern.

Hawaii Volcanoes National Park was established to preserve the natural setting of the volcanic landscapes on the island of Hawaii. As part of the United States, Hawaii's history encompasses a period where it was an independent kingdom, later becoming a U.S. territory, and eventually the 50th state in 1959. The park itself is a hub for tourists and plays an important role in the modern development pattern of Hawaii, which relies heavily on tourism and military presence.

Volcanic activity is a key feature of Hawaii's geography, with eruptions such as the destructive volcanic eruption that occurred in May 2018, offering a reminder of the dynamic and ever-changing natural forces shaping the island. The islands are known for their diverse ecosystems, which are protected and studied within areas like Hawaii Volcanoes National Park and other national monuments such as Kilauea.

Explanation:

This problem is a good example of Vertical motion, where the main equation for this situation is:

[tex]y=y_{o}+V_{o}t-\frac{1}{2}gt^{2}[/tex] (1)

Where:

[tex]y[/tex] is the height of the stone at 6s (the value we want to find)

[tex]y_{o}=925ft[/tex] is the initial height of the stone

[tex]V_{o}=20ft/s[/tex] is the initial velocity of the stone

[tex]t=6s[/tex] is the time  at which we need to find the height

[tex]g=32ft/s^{2}[/tex] is the acceleration due to gravity

Having this clear, let's find [tex]y[/tex] from (1):

[tex]y=925ft+(20ft/s)(6s)-\frac{1}{2}(32ft/s^{2})(6s)^{2}[/tex] (2)

Finally:

[tex]y=469ft[/tex] This is the height of the stone at t=6s

Final answer:

The stone is 469 feet above the ground 6 seconds after it is thrown straight up from the edge of a roof.

Explanation:

To calculate how high the stone is 6 seconds later after being thrown straight up from the edge of a roof at a speed of 20 feet per second, we can use the kinematic equation for uniformly accelerated motion:

h = h0 + v0t + ½at2

where:
h is the final height,
h0 is the initial height (edge of the roof),
v0 is the initial velocity,
a is the acceleration due to gravity (which is negative here),
and t is the time.

Given values:
h0 = 925 feet (initial height),
v0 = 20 feet/second (initial velocity),
a = -32 feet/second2 (acceleration due to gravity),
t = 6 seconds (time).

Plugging in the given values, we get:

h = 925 feet + (20 feet/second × 6 seconds) + ½(-32 feet/second2)(6 seconds)2
  = 925 + 120 - 576
  = 1045 - 576
  = 469 feet

So, 6 seconds later, the stone is 469 feet above the ground.

Answer:

[tex]1.7\cdot 10^3 N[/tex]

Explanation:

The impulse theorem states that the product between the force and the time interval of the collision is equal to the change in momentum:

[tex]F \Delta t = m \Delta v[/tex]

where

F is the force

[tex]\Delta t[/tex] is the time interval

m is the mass

[tex]\Delta v[/tex] is the change in velocity

Here we have

m = 84 kg

[tex]\Delta t = 1.2 s[/tex]

[tex]\Delta v = 24 m/s[/tex]

So we can solve the equation to find the force:

[tex]F= \frac{m \Delta v}{\Delta t }=\frac{(84 kg)(24 m/s)}{1.2 s}=1680 N \sim 1.7\cdot 10^3 N[/tex]

Answer:

(3) 3.2 × 10–19 C

Explanation:

The charge of a subatomic particle can only be an integer multiple of the fundamental charge, which is

[tex]q=1.6\cdot 10^{-19} C[/tex]

So, let's analyze the 4 options:

(1) 5.0 × 10–20 C

[tex]\frac{5.0\cdot 10^{-20}C}{1.6\cdot 10^{-19} C}=0.31[/tex] --> not an integer number

(2) 8.0 × 10–20 C

[tex]\frac{8.0\cdot 10^{-20}C}{1.6\cdot 10^{-19} C}=0.5[/tex] --> not an integer number

(3) 3.2 × 10–19 C

[tex]\frac{3.2\cdot 10^{-19}C}{1.6\cdot 10^{-19} C}=2[/tex] --> integer number

(4) 5.0 × 10–19 C

[tex]\frac{5.0\cdot 10^{-19}C}{1.6\cdot 10^{-19}C}=3.13[/tex] --> not an integer number

So, the only option which is correct is (3).

Answer:

(1) 5.0 × 10–20 C (2) 8.0 × 10–20 C (3) 3.2 × 10–19 C (4) 5.0 × 10–19 C

Explanation:

3.2 × 10–19 C

Final answer:

The question requires calculating the new surface area of the face of an iron cube after it undergoes thermal expansion due to a temperature increase, using the concepts of thermal physics.

Explanation:

The question revolves around the thermal expansion of an iron cube when its temperature rises. The expansion can be understood through physics, specifically the concepts of thermal physics. To find the new surface area after the cube has been heated, we need to calculate the new length of an edge using the coefficient of linear thermal expansion for iron and the temperature change. Once the new edge length is determined, the new surface area of a face can be calculated by squaring the length of one edge. Since cubic expansion affects each dimension equally, the change in surface area can be determined by considering the square of the ratio of the new edge length to the original edge length.

The orbital period of a spacecraft in low Mars orbit can be calculated using Kepler's Third Law, taking into account the radius of Mars and its gravitational influence.

The orbital period of a spacecraft in a low orbit near the surface of Mars can be calculated using Kepler's Third Law, which connects the time period of a planet's orbit (T) with the semi major axis of its orbit (r). It is important to note that the mass of the spacecraft is much smaller than the mass of Mars, and therefore, the mass of the spacecraft can be ignored in the calculation.

The formula for the orbital period is: T = 2π√(r³/μ), where μ (the standard gravitational parameter) is G*M (the gravitational constant, G, times the mass of Mars, M). Substituting the given radius of Mars into the formula we will get the orbital period of a spacecraft in a low orbit near the surface of Mars.

https://brainly.com/question/34145110

#SPJ3

The answer is: [tex]1.6888 \, \text{hr}.[/tex]

The orbital period [tex]\( T \)[/tex] of a spacecraft in a low orbit near the surface of Mars can be estimated using Kepler's third law, which relates the square of the orbital period of a planet to the cube of the semi-major axis of its orbit. For a circular orbit, the semi-major axis is equal to the radius of the orbit, which in this case is approximately the radius of Mars. Kepler's third law is given by:

[tex]\[ T^2 = \frac{4\pi^2}{G(M + m)}a^3 \][/tex]

where:

- [tex]\( T \)[/tex] is the orbital period of the spacecraft,

- [tex]\( G \)[/tex] is the gravitational constant [tex](\(6.674 \times 10^{-11} \, \text{Nm}^2/\text{kg}^2\)),[/tex]

- [tex]\( M \)[/tex] is the mass of Mars [tex](\(6.417 \times 10^{23} \, \text{kg}\)),[/tex]

- [tex]\( m \)[/tex] is the mass of the spacecraft (which is negligible compared to the mass of Mars),

- [tex]\( a \)[/tex] is the semi-major axis of the orbit (approximately the radius of Mars, [tex]\(3.4 \times 10^6 \, \text{m}\))[/tex].

Since the mass of the spacecraft [tex]\( m \)[/tex] is much smaller than the mass of Mars [tex]\( M \)[/tex], we can ignore [tex]\( m \)[/tex] in the calculation. The equation simplifies to:

[tex]\[ T^2 = \frac{4\pi^2}{GM}a^3 \][/tex]

Now we can solve for [tex]\( T \)[/tex]:

[tex]\[ T = \sqrt{\frac{4\pi^2}{GM}a^3} \][/tex]

Plugging in the values:

[tex]\[ T = \sqrt{\frac{4\pi^2}{(6.674 \times 10^{-11} \, \text{Nm}^2/\text{kg}^2)(6.417 \times 10^{23} \, \text{kg})}(3.4 \times 10^6 \, \text{m})^3} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2}{(6.674 \times 10^{-11})(6.417 \times 10^{23})}(3.4 \times 10^6)^3} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2}{4.276 \times 10^{13}}(3.4 \times 10^6)^3} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2}{4.276 \times 10^{13}}(3.93 \times 10^{19})} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2(3.93 \times 10^{19})}{4.276 \times 10^{13}}} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2 \times 3.93 \times 10^{19}}{4.276 \times 10^{13}}} \][/tex]

[tex]\[ T = \sqrt{\frac{4\pi^2 \times 3.93}{4.276} \times 10^6} \][/tex]

[tex]\[ T = \sqrt{\pi^2 \times \frac{4 \times 3.93}{4.276}} \times 10^3 \][/tex]

[tex]\[ T = \pi \sqrt{\frac{4 \times 3.93}{4.276}} \times 10^3 \][/tex]

[tex]\[ T \approx \pi \sqrt{3.77} \times 10^3 \][/tex]

[tex]\[ T \approx 3.1416 \times 1.94 \times 10^3 \][/tex]

[tex]\[ T \approx 6.08 \times 10^3 \, \text{s} \][/tex]

To convert seconds to minutes, divide by 60:

[tex]\[ T \approx \frac{6.08 \times 10^3 \, \text{s}}{60 \, \text{s/min}} \][/tex]

[tex]\[ T \approx 101.33 \, \text{min} \][/tex]

And to convert minutes to hours, divide by 60 again:

[tex]\[ T \approx \frac{101.33 \, \text{min}}{60 \, \text{min/hr}} \][/tex]

[tex]\[ T \approx 1.6888 \, \text{hr} \][/tex]

Answer:

Covalent bond between two atoms with unequal electronegativities results in unequal sharing of electrons.

Explanation:

Unequal sharing of electrons between two atoms results in polar covalent bonds, characterized by partial charges on the atoms, due to different electronegativities.

When unequal sharing of electrons occurs between two atoms, it results in a polar covalent bond. This type of bond is characterized by the partial charges that develop on the atoms involved. Atoms with higher electronegativities attract the bonding electrons more strongly, leading to a partial negative charge on the more electronegative atom and a partial positive charge on the less electronegative one.

The unequal sharing of electrons and the resulting polar covalent bonds are crucial concepts because they influence molecular structure, physical properties, and reactivity.

For example, water (H₂O) has polar covalent bonds between hydrogen and oxygen, with the oxygen atom having a partial negative charge and the hydrogen atoms having partial positive charges. This polarity allows water to dissolve various substances, making it an excellent solvent.

Answer:

2 x 10⁻¹²F

Explanation:

Capacitance is defined as the ration of charge (q) on either plates to the potential difference V between them.

                        C = [tex]\frac{q}{V}[/tex]

Where  q is the charge on the plates

             V is the potential difference

From the given parameters:

Charge on plate, q = 2.0 x 10⁻¹⁰C

Potential difference across the plate = 100V

Unknown parameter:

Capacitance of the system = ? = C

Solution

        Capacitance = 2.0 x 10⁻¹⁰/100 = 2 x 10⁻¹²F

Answer: A. The new idea was supported by experimental evidence

A P E X

Explanation:

The correct description of water is that it has a high specific heat and strong cohesive forces between molecules, which means it requires a large amount of energy to increase its temperature.

Among the options provided in the question, the correct answer regarding the properties of water is D. Water is a special substance with many unique characteristics due to its structure and interactions. One of its key features is that it requires a large amount of energy per gram to raise its temperature. This property is known as water’s high specific heat, and it is because the hydrogen bonds between water molecules must be broken to increase motion (temperature), which takes a considerable amount of energy. Additionally, water has strong cohesive forces between its molecules, which lead to a high degree of cohesion and contribute to its high boiling point compared to molecules of similar size.

Answer:

3099 J

Explanation:

While the fireman  slides down, his initial gravitational potential energy is converted partially into kinetic energy, partially into thermal energy, so we can write:

[tex]\Delta U = K + E_t[/tex] (1)

where

[tex]\Delta U [\tex] is the change in gravitational potential energy

K is the kinetic energy gained

Et is the thermal energy

The variation in gravitational potential energy is

[tex] U = mg \Delta h = (80 kg)(9.8 m/s^2)(4.2 m)=3293 J [/tex]

where m=80 kg is the mass of the fireman, g=9.8 m/s^2 is the acceleration of gravity, [tex]\Delta h=4.2 m[/tex] is the change in height of the fireman.

The kinetic energy gained is

[tex] K=\frac{1}{2}mv^2=\frac{1}{2}(80 kg)(2.2 m/s)^2=194 J[/tex]

where v = 2.2 m/s is the speed reached by the fireman at the bottom of the slide

So now solving eq.(1) we find the increase in thermal energy :

[tex] E_t = \Delta U - K = 3293 J - 194 J = 3099 J[/tex]

Answer:

3100 J

Explanation:

Because this scenario using three forms of energy (kinetic, gravitational potential, thermal), we use the conservation of energy formula:

0=ΔKe + Δ Ug + ΔEth

Keep in mind we want to find change in thermal energy, so:

ΔEth = -(ΔKe + ΔUg)

Change in kinetic energy:

ΔKe = Kf - Ki = [tex]\frac{1}{2}(0)^{2} -\frac{1}{2}(80)(2.2)^{2} = 190 J[/tex]

Change in Gravitational potential energy:

[tex]mgy_{f} - mgy_{i} = 0 - (80)(9.80)(4.2) = - 3300 J[/tex]

ΔEth = [tex]-(190 -3300) = 3100 J[/tex]

Change in thermal energy = 3100 J

Explanation:

This sentence is the description of the mechanical energy.

In this sense, the mechanical energy of a body or a system is that which is obtained from the speed of its movement (kinetic energy) or its specific position (potential energy), in order to produce a mechanical work.

That is to say: The mechanical energy involves both the kinetic energy and the potential energy (which can be elastic or gravitational, for example).

In addition, it should be noted that mechanical energy is conserved in conservative fields and is a scalar magnitude.

Therefore:

i sorry i thought of geocentric as something else it appears that the earth was the center

Answer: Earth

Explanation: edge2022

Answer:

D 60°

Explanation:

Using trigonometry:

- The new speed (v/2) of the particle corresponds to the hypothenuse

- The component of v/4 represents the side adjacent  to the angle that we want fo find, [tex]\theta[/tex]

So we can write:

[tex]cos \theta = \frac{adjacent}{hypothenuse}=\frac{v/4}{v/2}=\frac{1}{2}[/tex]

So we find the angle

[tex]\theta= cos^{-1} (\frac{1}{2})=60^{\circ}[/tex]

Answer:

D 60°

Explanation:

Using trigonometry in the attached image:

[tex]cos\alpha =\frac{v/4}{v/2}[/tex]

[tex]cos\alpha =\frac{1}{2}[/tex]

[tex]\alpha =cos^{-1} \frac{1}{2}[/tex]

Angle=60°

Answer:

the mass is the same

Explanation:

the mass of electrons is negligible so losing some to become positively charged causes no change in mass

Answer:

There is net transfer of energy and more over the balance between the number of charge particles occurs when there is some contact between any two surfaces or bodies. So, when an electrically neutral balloon is rubbed on a cloth and becomes positively charged it is just because of the number of charges that are transferred from a more charged body towards a body of having less charges on it. So, the masses of the positrons and the electrons are some how equal when compared.

Making, it more easy to understand that the two surfaces will have an equal number of positrons and electrons on both the bodies or object's surfaces.